07-17-2013 08:14 AM - edited 03-21-2019 07:34 AM
Hello, We have a costumer who needs to deploy an IPBX for around 30 remote site, each site has arround 30 users, we're thinking about proposing UC500, but the need is very strange, the costumer needs : 1 x E1 port + 2 x BRI + 2 x FXO to connect GSM gateway + 2 x FXS to connect a fax & alarm. What is the best option that can we propose ?
07-17-2013 09:00 AM
Do you intend to deploy 30 phone systems ? That can be good for sales but quickly become a nightmare to manage.
Realistically you could look at a 900 users centralized system with as few gateways as possible, eg Vg202 or ata 187, etc.
07-22-2013 04:37 PM
Hi There,
I believe that you are considering the wrong system, especially if I read you right, this will be a centrally hosted system at say site "A" and the rest of the other offices will be hanging of it.
If this is the case you should either consider the BE6000 or maybe even CUCMB, and if you are not certified for either one of them, then you should then consider partnering with a Cisco partner that is.
Are you going through any consultation process right now?
Cheers,
David Trad.
**When you rate a persons post, you are indicating a thank you or that it helped, but at the same time you are also helping to maintain the community spirit - You don't have to rate posts and you wont be looked down upon :) **
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide