VPN

Hello,I'm new to this version of ASDM / CLI ASA 9.1(3) ASDM 7.1(4)I'm currently running TWO 5512x. They are connected through VPN. NETWORK_OBJ_192.168.42.0_24: 192.168.42.1 / 24Filmtrack-Dev: 192.168.43.1 / 24AWSV: 10.1.0.0 /16RSORD: 192.168.200.0 / ...

I am using LDAP on my ASA and DAP, to assign VPN users from different AD group with different network access.  But now my LDAP server is about to be decommissioned, and I only can get a Radius server in replacment.  So, can I use Radius like I used L...

Hello,I've got two sites connected to each other using Cisco ASA 5505's and an IP sec tunnel. A little diagram of the setup:[ASA 5505] --- 50Mb u/d pipe ---> [Internet] <----- 45Mb u/d pipe ---- [ASA5505][Hou]                                         ...

Hello,I've got two sites using ASA 5505's connected with an IPsec tunnel.Site 1 has a 50Mb symmetrical pipeSite 2 has a 45Mb symmetrical pipeSite 1 has normal access speeds and contains all of the servers, etc.Site 2 accesses all of the resources fro...

Hi i have a RV042 vpn router. I want to connect to it through Quick VPN.I made an account under "VPN Client Access" tab and activated it. I Unblocked the WAN Requests. My port 500 isnt blocked. Ping requests are ok. When i try to connect from my Wind...

HiIm working with a 3rd party trying to establish a vpn. They are using a 2801 router which can do security and vpn. i terminat the vpns on a cisco asa 5520We have got to a point where when they run an automated test, the tunnel comes up, I can see i...

I am using RV110W and trying to connect vpn client but it's not working giving below errors when checked logs, even normal VPN is not working, Please help.....I have attached the log file as well.....  2012/01/14 18:37:27 [WARNING]Server's certificat...

HiI have a 2901 Hub with Version 15.0(1r)M16 (C2900-UNIVERSALK9-M), Version 15.2(4)M2, and a Cisco 1841 with Version 12.4(13r)T C1841-ADVSECURITYK9-M), Version 15.1(1)T but i did not get working a DMVPN between this 2 devices. Is it possible that the...

My VPN Client has worked for several years and recently, I started to get "Error 51: Unable to communicate with VPN subsystem.Please make sure that you have at least one network interface that is currently activeand has an IP address and start this a...

Hi I have a 2901 Hub with Version 15.0(1r)M16 (C2900-UNIVERSALK9-M), Version 15.2(4)M2, and a Cisco 1841 with Version 12.4(13r)T C1841-ADVSECURITYK9-M), Version 15.1(1)T but i did not get working a DMVPN between this 2 devices. Is it possible that t...

We are in the process of testing an "Always On" VPN solution for our remote users using the Anyconnect 3.x client and the SBL module.  We've opted for machine based authentication that uses certificates from our PKI.  The VPN head end is a pair of AS...

Cisco ASA 5505, Software 8.0(3)MikroTik RouterBoard RB493AH, RouterOS 6.0IPsec site-to-site is set up.When MikroTik initiates IPsec tunnel to Cisco, it is established, data are encrypted and sent through tunnel as expected.When Cisco should initiate ...

Hi All,I have to create dynmaic VPN on our multicontext firewall ASA 5510 with 250 VPN license.This Firewall will have statically assigned ip address and ten hub sites will obtain ip address dynamically from ISP.My question is how many VPN license wi...