VPN

Hi Experts,I noticed that there is a new entry in DCT for ASA VPN options: Anyconnect SSL VPN User /Single Device.Could you please give some explanations about it?Also, what's the difference between the above and 'AnyConnect Essential License'?Rgds,-...

Hi friends... I'm stuck with L2TP IPSec VPN configuration. I have Googled some days but didn't able to get any helpful tips and get this working.Below is my script and when I'm trying to log below logs can be found;Logs:%PIX-3-710003: TCP access deni...

I have successfully configured the ASA 5505 for remote access VPN. All machines run windows 7 and i can succesfully connect to the network and browse files on the server by using the IP address, but i cannot ping the Server from the remote machines, ...

Hi All,I've setup L2L VPN between ASA and IOS, tunnel has been up and running but no traffic is encrypted in ASA and no traffic is decrypted in IOS router. In ASA I am using NAT, but in IOS router NAT is not being used and all traffic from router mus...

What must be done to allow user traffic to come in from a remote user (using a Cisco VPN client on their latp) via the ASA's Outside interface and then have that traffic turn around and go back out via an ASP's VPN tunnel on that same outside interfa...

Could someone explain SSL VPN and Port Forwarding to me? I have a recently installed AS 5520 that replaced our old PIX 515.  We have a contractor who accesses some devices on our network, and they previously used traditional ipsec vpn (we also had a ...

Hi Everyone,I have got a Site to Site VPN.I've got a Cisco ASA 5520 device at my work place and  a Cisco 857 ADSL router for a branch office and have the internet up and  running,But I have minor issue and that is I have to reset my branch router con...

Hello,i've a Asa 5510 configured with webvpn and Authentication over an MS-ADS-Server Windows 2003. Authentication is working perfectly, but password-management doesn't works correctly.If the user password expires in 14 days, he gets an Password-chan...

HIi have multimesh ipsec vpn over pix ,asa and 2811 routers between various sites ,for a new site with Asa 7.2.4but suprisingly when i initiate traffic from asa side tunnel is up and host between the sites can ping each other.When the  session is end...

Hi Guys.I haev noticed there are some issues with the Clientless SSL on the ASA and websites that support AJAX posted in these forums but nothing as yet has seems to work for individuals.my setup is an ASA5505 running 8.3.2ED. and a Synology CS407 ru...

Recently performed activation of AnyConnect SSL licensesFirst site has a ASA5510 - After entering the activation key (as depicted in pdf from licensing)  After a save and a reload My BotNet Traffic Filter was disabled.Re-entering the key did not help...

Can anyone tell me if ASA (5505 on 8.04) supports using Ajax web applications through the WebVPN portal?Specifics : I am trying to use the management pages of a Synology NAS running Disk Station 2 software. This management page uses Ajax. It looks li...

I have some VPN clients that need to access a device on an internal subnet that is not directly connected to the 1801 router acting as the Easy VPN Server.  The router has an internal IP address of 10.20.1.1.  The VPN clients are being assigned addre...