VPN

Hi Team,We are unable to download the mails thru VPN that our intrenel traffic is passing through ASA Firewall with NAT Zero. Anything is blocking in our Firewall or can we suspect Internet service provider.Fyi we are able to getting VPN connection....

Hi,Following is the scenerio:Company A(172.16.1.0/24) > Company B(192.168.1.1/24)Company A(172.16.1.0/24) > Company C(192.168.1.1/24Need to establish VPN between A>B and A>C.Is the destination nat is possible?Is any other way to work on this case?A o...

We have been assigned a new block of IPs xxx.xxx.69.0/28 in different range to our existing ips xxx.xxx.94.145/28. The new block is being routed directly to our existing outside interface xxx.xxx.94.146. I would like to add this new block to the outs...

Greetings - I've got a Cisco VPN Concentrator 6030 running 4.7.0 of the SW. I need to change the IKE Proposal to use SHA-1 for FIPS reasons. Currently MD5-HMAC is used. I've altered the IKE proposal configuration so that the SHA items are at the t...

Folks, I have a NAC configured with web login page to authenticate users, but on URL of the web login page show my CAS IP address.https://172.18.0.10/auth/perfigo_weblogin.jsp?cm=ws32vklm&uri=http%3A%2F%2F2.2.2.2%2FI saw that the CAS get this informa...

Can a 1710 router do a site-to-site IPSec VPN with an ASA 5520?

Hello,I've started reading about GET VPN. Most documents talk about how this solution is not recommended over the public internet. But is it possible? Would it be possible to use GET and NHRP somehow? Does any one have any experience with such a conf...

Can anyone point me to a complete example of configuring the most basic form of 802.1x port authentication with ACS version 4.2. Also can anyone answer me whether or not a certificate authority is required, if there is a method without the requiremen...

'm using the ASA for anyconnect users and I keep seeing log messages similar to the following: 4 date=Oct 07 2009 Source IP=10.1.1.201 Source Port=17571 Destination IP=10.0.250.18 Destination Port53887 Duplicate TCP SYN from inside:10.1.1.201/17571 t...

Hi folks,I wish someone poke a finger at where I made a mistake in configuring a pair of firewalls for site-to-site VPN. The tunnel is on and traffic freely flows between two remote networks. The only thing is that one remote network (Site B) can't a...

I am trying to establish site - site vpn tunnel b/w cisco ASA and Juniper FW. ASA is using in my end.I can see tunnel as up when I am giving show crypto isakmp sa.but the other end users are not able to access the inside allowed server through vpn tu...

Someone know if the rfc4556 is implemented in cisco vpn client (http://www.faqs.org/rfcs/rfc4556.html)

Hi all,I have a ASA with these settings:Internal Network: 192.168.1.0 /24External Interface: AA.183.142.222Our vendor has an ASA with these settings:Internal Network: 192.168.50.0 /24External Interface BB.179.80.108We wish to create a L2L VPN with ou...

The following is some of the output of a show vpn-sessiondb detail l2l command on a Cisco ASA: Tunnel ID : 1364.2 Local Addr : XXXX Remote Addr : XXXX Encryption : 3DES Hashing : MD5 Encapsulatio...

HelloOur Current network represent HUB with 3 spokes using frame relay as a wan connection that's indeed costly, I suggested to buy a DSL link with 512 k on each site and Connect these 3 branches to H.O using IPSEC,I need help to redesign the networ...