VPN

Hi, allI have a problem deploying Remote Access VPN between PIX (PIX OS 6.3(4)) and Cisco VPN Client 5.0.00.0340. The current situation is I have IPSec tunnel established, I can see with the capture tool that ICMP Echo packets are coming from Remote ...

The tunnel from my main site to my two remote sites drop at least 1 once or twice a day. Main site has VPN 3000 Concentrator version 4.1 and my remote sites have a cable modem that hooks up to a pix 6.3. We have noticed this for some time. Why is...

I have been trying to get a VPN up between my CP firewall and an 1841 at a partner site, and am having problems I can't figure out. I am not getting return traffic from the site.All traffic from my site is NATed behind one addressTrafic at the router...

To anyone that can help me:I have configured a LAN to LAN VPN with static NAT on a Cisco 3000 VPN concentrator. I need to know how to restrict access to this paticular VPN to a select group of hosts on the private network.

New Site installation of PIX ASA 5520 - Remote VPN clients authenticate and have access to internal network, with IP derived from internal IP pool. When a remote web site requires IP authentication and is added to split tunneling, the user cannot c...

Hi everyone, I'm in need of some clarification regarding a split-tunnel/acl situation that has arisen.I want to give the user the secured route of 192.168.0.0/16 when he VPN's to the ASA5510The user on the other hand has 192.168.1.0/24 as his home ne...

Hi there,When I dial from cc terminal into my as5400 box, it tries to speak to the authentication server which is on the LAN. However, the connection is rejected by the server due to unexpected error. I've managed to capture the traffic using etherea...

I am new to Security. I have a QUESTION. My question is that i am looking for a way to deploy WPA/WPA2 on an existing IPSEC based model. The IPSEC tunnel is build with cisco hardwares at the originating and the terminating point. The solution should...

My current situation is this and hopefully it won't be too confusing. I have connected a PIX with the ISP on the outside interface and a Linux server on the inside interface. If I connect the Linux server directly to the ISP port I can see the server...

Hi All,I test vpn3000 connected with vpn client 4.x through remote desktop (vpn client installed in a pc which I control with remote desktop), the pc and vpn3005 in the same subnet, I have config everything, but I got the following debug message in v...

hi, am malaika ,am new to cisco solutions . i need to implement a vpn solution for a client , but am at a loss as to how to go about it can some one help me.

i have setup a small home network to practice filtering vpn traffic (see attachment for network layout) below are the configurations for the routers (cisco 1720's) at each end of the tunnel,i have configured an access list (access-list 110) which is ...

Hi everybody,I really hope somebody has seen this issue before and can help me!I am trying to setup a simple L2L tunnel between two ASA5520s. I already have a tunnel from each ASA to a 837 which works perfectly. However the ASA-ASA tunnel only appear...

I have a third party VPN server and a PIX 506e that are going to have a site to site connection. The third party is called a Junxion box and has very limited settings. I have had the Junxion and the PIX Site to Site setup and working with no problems...

Dear Guys... I have two Routers One is connected to other through VPN on different cities... VPN works well i m able to access the LAN on both sides... BUT I CAN NOT BROWSE THE INTERNET this is the major problem in my network..... How can i do it... ...