VPN

Hello,I'm having issues establishing a VPN on a 871 through a NAT.The 871 goes through an ISP to another router across the internet. It has 4 VLANs configured, and the goal is to VPN one to a network through the internet. Obviously being the internet...

Hi,I have a router in the center and have 10 Remote-sites that use the same subnet Remote-site 1 : Subnet 192.168.1.0/24Remote-site 2 : Subnet 192.168.1.0/24Remote-site 3 : Subnet 192.168.1.0/24and so onIst there any way to connect to these subnets a...

hi Guys, i have a client they wanna access a server at some bank. the server has Public ip. the server is secured by check point firewall. at my end i have Cisco ASA 5510. the requirement from bank is that clients at my end must use public IP. i...

I have ASA 5520 . please understand my topologyOUTSIDE----ASA---INSIDE--CORE SWITCHI have a pc connected on core switch ip 172.16.3.3 and other pc is 172.16.3.5.when i am connecting from Remote VPN i am able to ping 3.3 but no able to ping 3.5, WHYI ...

I am removing the Split tunnel configuration on an 1811 router connected over a PPPOE connection. The tunnel is working but I am getting timeouts every 10 packets or so and there is severe latency. I am wondering if the dialer pool statements were...

I have installed successfully the CISCO VPN client 4.9.01 0080 on my Apple iMac OS X 10.4.10.I launch the client without problems, i connect to my CISCO VPN 3000 concentrator, but when i'm connected to VPN i cannot access my remote network nor intern...

how to trace a particluar ip which is hitting the pix nating ip quite frequently,how to use the log in formation,with date,

Hi all, I have a 2610 router using 12.1 IOS. It currently has a box to box VPN tunnel to our PIX at HQ.How can I allow individual or groups of users to create outbound PPTP VPN tunnels from their work stations? Cisco is telling me that I have to us...

Hi,I am having problem with troubleshooting getting accounting response packets to VPN 3K server. Its works fine for few of the vpn servers and for rest, the stats for accounting only show re-transmission and timeouts. What should i look for in firew...

I am trying to create a tunnel between the above two devices. The tunnel is not coming up and I ran a debug to help me figure it out. However, the debug doesn't really show any errors. On the Netopia side all I get is "Phase 1 Complete" and nothin...

We have a machine here that will connect to our VPN and establishes a connection. However, it will not load intranet webpages.We use a proxy script for delegating internet/intranet surfing. When it is disabled, the machine just refused to connect. Wh...

Hi I want to be able to tell the router to divert traffic towards the VPN tunnel using the public internet if the serial primary link fails on the router. How can I do this?

Hello,I am trying to figure out how to get my router to initiate a PPPoE connection to my ADSL modem which was provided by my ISP.RouterE0/1-->modem-->internetFor some reason it doesnt connect.I get this (with debug ppp auth and dialer on):00:48:18: ...

Hi,we currently use CiscoSecure server to authenticate our remote users against an RSA database.We have set-up different .PCF files corresponding to the VPN groups on our firewall. So, a particular Profile is only allowed access to certain parts of ...