I've been trying to read up on vpn backup solutions and would like to figure out a way to learn routes through my vpn and then use that vpn to get to that network. Any sugestions? Patrick
I now have a FR network connecting a central site and many remote sites. Later i have a VPDN network from provider, and I wish them to become the backups for FRs. for the VPN,the central site connects to provider with 10M, and remote sites connect by...
I have two router on the internet. One of them establish a VPN connection with the other one. This work well, but I want to make a VPN in a "two-way" connection. The first router can establish the VPN to the second router and the second to the first....
Hello,My PIX 515 6.3(4)is configured to allow VPN connections. When I am outside my network, for say at home, I can VPN to the PIX and then do an RDP to a Windows Server box. I do this for Network Management purposes. This is working like I want. Her...
I have a question, and I think this should work, but please shoot me down if it's not possible. Our office is in California, and we have a branch out in Florida. We want to join the Florida's Windows Domain and create a Domain Controller here in Cali...
Dear All,I'm trying to configure a PIX 515E with 7.1.2 software to enable WebVPN.I'm following istructions from this document:http://www.cisco.com/en/US/products/ps6120/products_configuration_guide_chapter09186a0080334071.html#wp1042124When I enter t...
I have a set up my firewall (ASA5520) running 7.1(2), when I initiate a vpn client (cisco) to customer site. It goes thru the login process, gets an IP from the pool (IPSec over UDP). That when it stops. Can't ping any devices on the LAN. If I connec...
Hi All..We have a VPN 3015 concentrator and use radius authentication to pass the authentication to Active Directory. Works like a charm, except for one thing. Our users do not get a prompt to change their password when connecting across the VPN. AD ...
Hi Pros,Just some concept questions. How does a PRI router hunt for the correct dialer interface to serve the incoming calls.Correct me. 1 dialer interface for each peer. This interface will serve both incoming and outgoing calls Cheers guys,kelvin
Hello all,Just a question regarding virtual profiles.Can I mix async and sync(ISDN)interfaceswith virtual profiles configuration?If yes, I guess that any interface(L2,L1)specific configuration should be configured on the same interface or through AAA...
Hello All, When starting PDM and going to configuration I receive an error that says"PDM has encountered a firewall configuration command statement that PDM does not support. Configuration parsing has been stopped. PDM access is now limited to the Ho...
Hello,I'm in this situation:- A VPN 3000 at the core.- Spokes are Cisco IPSEC Router on internet.Some of these routers have two Internet Gateways provided by two different ISP.The Second gateway is used as backup of the First internet Gateway.When Sp...
Has anyone tried to use the native VPN client in OS X 10.4.6 to connect to a 3000 series Cisco VPN box? The probelm we have here is that when Apple upgrades OS X the Cisco client breaks. We're trying to see if we can use the VPN client that comes w...
I have a funny problem concerning dial backup between HQ and branch using async/modem. The setup at HQ is E1 PRI and at branch is using modem connecting to aux port and configured so that only branch can call HQ. The problem is sometime it can get co...
Hello,I need someone to clarify me the concept of "AAA per user".(for debuggingpurposes)Does this mean that can configureon AAA a user profile with IP andgeneral L3 info for specific user?Which the difference with simpleAAA authentication/authorizati...
