VPN

hi all!i have a problem whith establishing connection berween pix 515 and windows wpn clien over pptpi newbee in cisco pix and i using PDM to setup VPNi allowed vpdm on outside and inside interfaceswhen i trying to connect from outside i get error me...

Hi all, I have a question regarding authentication for ISAKMP/IKE. I'd like to use RSA-SIG as the most secure option, however my client doesn't have any CA available and doesn't want one! I've read some conflicting information from Cisco docs, some ...

hello,I'm trying to establish a Vpn connection from home to work.Here Are some details about the architecture and the configuration At home : Windows xp pro sp2 with cisco VPNcliënt version 4.6.00 installed on it. Connecting the internet through a s...

We currently run 2 Max 6000's (For Dialup/ISDN Access) - We now have a requirement for dialup/ISDN backup services for VRF's.We are looking at a device that will perform the duties of the MAX's, but also allow us to "drop" dialup connections into VRF...

I have what I think is a simple scenario but I can't find a way to implement a solution.I have the following:VPN Clients<->CiscoPix506e<->Cisco3000The VPN clients run a IPSEC VPN to the Cisco PIX 506e and can access it's "internal network" just fine....

Hello.We are trying to get the latest Cisco Trust Agent 2.0.0.30 to work with VPN. Cisco VPN client is version 4.8.00.0440, and the Concentrator is 3030, running software version 4.7.2e.Connecting the computer to a switchport works great, both L2 an...

I have users utilizing a VPN 3000, trying to route through a PIX 515 firewall to get to our network. They can authenticate to the Concentrator, but not get through to our network. On the PIX, I have ethernet2 labeled VPN and ehternet3 labeled DMZ. ...

HI allAppreciate if you can give me some guidance on what could have went wrong with my configuration. My remote client VPN was working fine till I loaded in the site to site configuration.I believe there must be some issue with my configuration for ...

Hi,I've a few questions about SSL VPN Client configuration on Cisco ASA. Does anyone please advice me?1. Can I assign SVC address as the same subnet as inside network?2. Do I need configure any security policies and network address translation for SV...

I have a challenge with clients being able to access a web application after the port forwarding is enabled.The port forwarding is working fine, however when the client clicks on the link (on the concentrators home page)to reach the server the concen...

Hi,Need some advice in the configuration.My customer had subscribed a GPRS line, in which he was given two GPRS modems with SIM card each. If he connects the GPRS modem to the PC directly at each remote location, both modem are able to dial to each o...

Is it possible to have LAN 2 LAN VPN, hub site with dynamic and sopkes with set peer, but, hub site still can initiate a call (without set peer)? I know the DMVPN is a solution but how about traditional VPN ?thanks

We utilize an ASA5510 firewall and have an outside user who wants to gain acccess to one of our servers, which is running MS Windows 2003 server, using Microsoft's Remote Desktop (RDP). How do I go about setting this up to allow access. Use the fol...

Does Cisco have a recommended configuration for “Extranet” (inter-organizational) IPSEC VPNs between autonomous networks; taking into account RFC1918 overlap, Bi-NAT, Routing, ACLs, etc.?The PIX <> 3005 w/ overlapping address space seems like a good ...