Hello, Is it possible to get the NAM profile name applied from any Windows registry key? We need to check that the NAM profile is correctly applied using SCCM and, since the configuration.xml file disappears from the folder once AnyConnect processes ...
Forum Posts
Dear All expert,please help me to solve this problem,right now my HQ and branch link by VPN but i would like to do 2 branch access by VPN( i mean that now all the branch can access to HQ only but Branch to Branc cannot access .Could you let me know h...
ASAHello, I'm facing a problem with S2S VPN between 2 ASAs 5506-X ver. 9.9(2)18. The VPN was working fine 6-7 months but last week It suddenly went down. I did a few troubleshooting steps (debug crypto ikev1 128) and packet capture on both sides. I c...
Hi Team, Using a VDI for 11 users saw that the performance is extremely slow in a remote office with around 7.5mbps download speed and 0.71 mbps speed. We are using a cisco site to site VPN tunnel to connect to the DC from where VDI is being launch...
Hello, Does anyone know if it is possible to enforce host isolation using Cisco any Connect even when the VPN is disconnected?I would like to prevent user from connecting to other host in home/public LAN when they are off premises whether the VPN is ...
You are my last hope!Our partner provides a service that is available only through the L2TP/IPSec tunnel. We successfully connect to it from Windows, but the connection hangs dead a couple of times a week. Therefore, I decided to set up L2TP/IPSec co...
We use Clientless SSL VPN to advertise websites configured through Bookmarks on our ASA. One of the sites requires a Smart Tunnel enabling to allow the website to be accessible through our system. The URL works perfectly through IE11 and below but ...
Hello all, Wondering if someone can help me with the following. We are moving datacenter and as a result our users will be required to connect to a new FQDN within their AnyConnect Secure Mobility VPN Client. The new FQDN points at a new Cisco ASA. ...
We are running AnyConnect NAM ver 4.7.00136 on our laptop estate primarily to ensure that devices do not connect to both wired and wireless networks at the same time. This works fine for networks with any form of encryption. However when users connec...
can someone please explain what proposals "as in the attached picture" do in a vpn? do they need to match at both sides? i thought parameters needs= to match only in phase 1 and phase 2 "hash, authen , group , lifetime , encryption" what is proposal...
Can anybody tell me if AnyConnect Hostscan feature in ASA context is on roadmap or not? For now, this feature isn't supported in contexts. https://www.cisco.com/c/en/us/td/docs/security/asa/asa910/configuration/general/asa-910-general-config/ha-cont...
I am trying to understand what license(s) I need to enable VPN on my C897VA-K9 License info below OIS-02-VDSL#show license allLicense Store: Primary License StorageStoreIndex: 0 Feature: advipservices_npe Version: 1.0 License...
I'm attempting to connect 2 ASAv together in an AWS sandbox. They are in 2 different subnets connecting through a L2L tunnel. I've read through many of the posts on this site and attempted some of the fixes, but I can't figure out why I cannot crea...
Hi, I have two cisco ASA. 5508 (on-site) + 5506 (remote)The tunnel comes up. Traffic can flow from onsite to remote. But Traffic can't flow from remote to on-site. I have tested with another remote site (spare site) and concluded the issue in with t...
Resolved! What wrong with my setup ASA AnyConnect
I have and ASA an its only use will be AnyConnect. I have both interfaces connected to a switch. ASA#inside 172.21.0.2outside XXX.XXX.XXX.2 route outside 0.0.0.0 0.0.0.0 XXX.XXX.XXX.2 On the switch I have the interfaces set up for access to their pr...
