VPN

Trying to figure out if there's any way to pass my ASA control plane traffic into an IPSec tunnel that originates on the ASA.   Use case would be to authenticate ASA logins from an AAA server that lives on a network at the other end of the tunnel.

Hi,   My company is using the Cisco Anyconnect client for our remote users.  When users log in, they have access to the whole /24 network at the office.  Is there a way to limit specific users to only specific network resources?   Example: User group...

I have two ports. One is a designated port and the other is root port. Can I remove the device which is connected to the designated port ? Is there cause any problem ?

Hi, I have a Cisco ASA 5510 which is connected via VPN (side-to-side) with an other Cisco ASA 5510.Using my FritzBox 7490 only as a modem, everything works fine, for many years.Now, as I need to connect some phones, I use the FritzBox 7490 as an rout...

hi,   I installed anyconnect a few days ago. After setting the firewall, it worked well on that day. After that, I can't connect to my university anymore.like this: 0:16:40 Contacting home-rz (IPsec) IPv4.0:16:47 User credentials entered.0:16:49 User...

I setup an ikev2 vpn tunnel from firepower deployed in azure  to an ASA in the remote site . the tunnel is up , but no data is being transfer through the tunnel. The acl's are in place to allow data flows between the 2 devices .  Any one got this sce...

Hi all, i try to install Cisco Anyconnect 3.1.14018 or 4.5.04029. I get the following error:   There is a problem wirh this Windows Installer package. A program run as part of the setup did not finish as expected. Contact your support personnel or pa...

Hi    Having issue with aaa . we have configured aaa but still its not  taking tacacs credential , instead taking local credential.   Currently device in production , so before touching the aaa configuration , i should  know what i should not do. but...

We have a 7200 router with the VAM2+ card, and one functional GRE/IPSec DMVPN tunnel. We are trying to create another one since these are in an MPLS environment and cant be shared between customers. I believe I may have the answer to my problem, but ...

I need to fine the root bridge in my network. How can I ensure that the specific device is acting as a root bridge in the network ? I need to add some more switches in the network but in transparent mode so I want to confirm that the specific device ...