VPN

cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Cisco CyberSecurity

Labels

Forum Posts

Hi guys,I'm hoping someone can help.I seem to have created a problem with my ACL's.Traffic is fine going to and from the internet, however traffic to our site in the cloud gets dropped at the outside of the ASA. We are using a ASA 5512x One of the bi...

Hi Experts,Good Day!I have a deployment which I'm having now some issues. Below are the requirements for the remote access VPN (RAVPN) network that I'm going to build.Requirements:- Dual ISP (each ISPs has different public IP block)- Dual ASA (as my ...

Hi, I was wondering, if I wanted to check if any IPSEC or Anyconnect vpn's had been created and what split tunnel/VPN filter ACL's  they are using what would be the commands to do this? I know I can do this through ASDM but I would like to know how t...

Sheraz_35 by Level 1
  • 809 Views
  • 2 replies
  • 0 Helpful votes

Here is the log from the client.  I see that it is failing here: DEL_REASON_IKE_NEG_FAILED.  But I just cant seem to find the error in the config. Any help is appreciated.  Cisco Systems VPN Client Version 5.0.07.0290Copyright (C) 1998-2010 Cisco Sys...

Hi, I have a Site to site VPN configured from a CISCO ASA 5512X to a Cisco ASR router. ASA inside network is 10.10.1.1/24 and the other end has 10.10.20.0/24. VPN tunnel is established and the traffic flows from ASR to CISCO ASA but the reverse is no...

DivZ by Level 1
  • 523 Views
  • 2 replies
  • 0 Helpful votes

I have a site to site Ipsec VPN configured on a cisco router. so can you configure L2tp/IPsec Remote Access Vpn on same router so that i can use both. If yes what changes do i have to make.

I have configured new cisco asa 5512. i cant access our website from outside. We host our website internallyhere is how i configured. Webserver internal IP is 192.168.1.19in following config i changed my web server public ip to 99.99.99.99Can anybody...

macboy276 by Level 1
  • 1842 Views
  • 7 replies
  • 0 Helpful votes

Hi All, I've found various bits of info on this topic, but nothing really clear so I wanted to start a new thread to see if we can create a template for what I believe is a very common scenario.  *Please see attached diagram.  Many of us today are us...

dkraut by Level 1
  • 1741 Views
  • 3 replies
  • 0 Helpful votes

I have a phase 2 mismatch I cannot sniff out, please help! Below are the relevant configs. ASA <---> cisco 891F router using site to site vpn settings.  I have the crypto maps applied on the outgoing interfaces and PHASE 1 works fine, phase 2 fails a...

chrisfore by Level 1
  • 9737 Views
  • 3 replies
  • 0 Helpful votes
Top Solution Authors