04-03-2020 05:28 PM - last edited on 04-27-2020 09:00 AM by Hilda Arteaga
Español | Português | Français | Русский | 日本語 | 简体中文 |
This event continues the conversation of our recent Community Ask Me Anything event "Secure Remote Workers".
Here’s your chance to discuss more about the configuration, troubleshooting and best practices for AnyConnect secure mobility client on a Cisco Adaptive Security Appliances (ASA) and Firepower Threat Defense (FTD) and its integration with other Cisco security portfolio devices and technologies like ISE and Duo.
This session provides an opportunity to learn and ask questions about various aspects of AnyConnect implementation (using SSL and Ikev2) including (but not limited to) emergency licenses, configuration, deployment and troubleshooting AnyConnect that provides the security necessary to help ensure that your organization is safe and protected in such critical situation.
To participate in this event, please use the button below to ask your questions
Ask questions from Monday 6 to Friday, April 17, 2020
**Helpful votes Encourage Participation! **
Please be sure to rate the Answers to Questions
Solved! Go to Solution.
04-15-2020 03:15 PM
04-15-2020 04:43 PM
04-16-2020 09:12 AM
My profile does contain the serverlist and hostentry sections for the servers I want to connect to. I was following along this comment (https://community.cisco.com/t5/vpn/community-ask-me-anything-configuration-troubleshooting-and-best/m-p/4063991/highlight/true#M271759) "If you modify the XML profile and push it to the clients along with your OnConnect script to the right location it will work".
We will be using a combo of GPO/MEMCM to push the files along to the clients.
04-16-2020 09:47 AM
04-16-2020 02:26 PM
Yes. It has all of the ServerList, HostEntry, HostName, HostAddress, and UserGroup sections...
04-15-2020 05:16 PM - edited 04-15-2020 05:22 PM
04-15-2020 05:27 PM
Hi again,
We have a physical FMC2500 and I am evaluating the option to use FTDv in VMware ESX.
I know that with ASAv is necessary to purchase a throughput license, is there a similar requirement for FTDv?
As I could read all what should be required at the minimum in our case is
Considering we have already ESX hardware available and the FMC and the anyconnect licenses we would purchase anyway, I understand there is no additional costs I am missing, correct?
In case we should then add
Thanks in advance!
04-16-2020 03:17 AM
04-16-2020 03:52 AM - edited 04-16-2020 03:53 AM
04-16-2020 03:56 AM
Thank you Pulkit,
I am looking at the ordering guide for Firepower Threat Defense Virtual and I am a bit confused, I hope you can help.
From your answer I understood that the FTDv does not need a specific license for the Firewall to operate on a Physical FMC as base license is always applied in that case and in our situation only Threat and Anyconnect licenses should be purchased.
Then I saw the following table from the ordering guide :
And I tried to build an Estimate into Cisco Commerce and I can see it has a cost and all the other licenses are at 0 cost...Can you help me understand how this needs to priced ?
I expected the other way around that the Virtual appliance would have 0 cost (besides Smartnet) and the feature licenses would have a specific cost
Is the FPRTD-V-K9 License required in case we use a physical FMC ?
04-16-2020 12:51 AM
I would like to join this event please share the registration link
04-16-2020 01:51 AM
Hi Sachin,
The way you posted your current message, in the same way you can post query.
It is an open platform.
The event page is :
The discussion page is :
-
Pulkit
04-16-2020 02:46 PM
Hi,
cisco anyconnect vpn on asa and wants do posture ,
what are the licenses required on both asa and ISE
Thanks
04-17-2020 01:09 AM
Hi Bluesea2010,
So we want to configure anyconnect ISE posture.
Two main licensing requirements are :
Below link provides information on licenses for ISE :
A few good documents to have basic understanding on configuration and flow :
-
Pulkit
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide