site to site, overlap

[w_basheer]

Dear;

I wana to configure Site-to-Site network but the two local networks are the same subnet.

how can i deal with such issue.

[Danilo Dy · Accepted solution]

You need to perform NAT, check this link for a sample overlapping network

http://www.cisco.com/warp/public/556/3.html

[w_basheer]

I have small office;

I already NAT all my devices to the Internet.

but i need to establish a VPN tunnel between with other site with the same local IP addresses.

[acomiskey]

You can have it both ways. Maybe this will explain better. What are the devices?

http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a00800949f1.shtml