Configuring ACCESS CONTROL WLC 5760

[Siva chinap]

Hi all,

I am new to Wireless tech, i have two WLC 5760 controller one for redudancy.

What are the configuration i need to done,please advice me.

[Leo Laohoo]

Duplicate post. 

Go HERE.

[Abhishek Abhishek]

Please refer to the link-

https://supportforums.cisco.com/document/146996/getting-started-wlc-5760-and-3850

[Prakash Parvathala]

Hello Shiva,

Pls check the below link as it will give you a very basic configuration required on 5760 .

http://mrncciew.com/2013/12/12/getting-started-with-5760/

Here is some other best practices when configuring 5760

http://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/5700/software/release/ios_xe_33/5760_IOS_WLC_Configuration_Best_Practices.html

Pls check the below link as it will give you a very basic configuration required on 5760 to get it start.

http://mrncciew.com/2013/12/12/getting-started-with-5760/

Here is some other best practices when configuring 5760

http://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/5700/software/release/ios_xe_33/5760_IOS_WLC_Configuration_Best_Practices.html

- See more at: https://supportforums.cisco.com/discussion/12448451/wlc-5760#sthash.jqvko2r0.dpuf

[sobhardw]

Please go through the below link :

http://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/7-5/ConvergedAccessDG3_2_2.html#pgfId-43851

http://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/7-5/ConvergedAccessDG3_2_2.html#pgfId-43851

http://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/7-5/ConvergedAccessDG3_2_2.html#pgfId-43851