cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
189
Views
15
Helpful
6
Replies
Highlighted
Beginner

Wireless access based on device type. BYoD

Hello,

 

I have a Cisco WLC 2504 ver. 7.4.110 with LWAPs connecting from various global locations through Flexconnect.

 

I would like to know if we can configure access to network resources based on the devices type like Mobile, laptop and Desktop. Is it possible without ISE or any other product.

How it can be configured?

 

Does the same WLC model has capability to do this? or We need to upgrade to a different model.

 

Regards,

 

Anand

 

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Beginner

Hi Anand,

This can be done using local policies.  However, I haven't tested it though.

IOS version - 8.0.110.0

Please find attached screen shot for your reference.

http://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/7-5/NativeProfiling75.html

Cheers,
VB

View solution in original post

6 REPLIES 6
Highlighted
Beginner

Hi Anand,

This can be done using local policies.  However, I haven't tested it though.

IOS version - 8.0.110.0

Please find attached screen shot for your reference.

http://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/7-5/NativeProfiling75.html

Cheers,
VB

View solution in original post

Highlighted

Hello VB,

 

Thank you very much for the solution.

 

One more query is that can we get a list of device types from the controller, which devices e.g. Android or Windows or Apple are connecting to the network. If we get this list then it will be easier to design policy based on the device type.

 

Regards,

 

Anand

Highlighted

Hi Anand,

Yes!

You can get that info from the WLC and please find attached screen shot for your reference.

 

Cheers,
VB

 

Highlighted

Hello VB,

 

i am not getting the device types as my own mobile is showing as laptop in the WLC.

Is there any feature i need to enable?

 

Regards,

 

Anand

Highlighted

Hi Anand,

have you enabled profiling under WLAN?

 

WLANs> test > Advanced 

Local client Profiling

1)DHCP Profiling

2)HTTP Profiling

Also, the below youtube video may help you!

https://www.youtube.com/watch?v=wbauUQ0Wquc

 

Cheers,
VB

 

 

Highlighted

Thanks VB,

 

I was able to do it. Thanks again.

Content for Community-Ad

This widget could not be displayed.