05-16-2006 10:55 PM - edited 07-04-2021 12:05 PM
hi i have a 1200 ap and its radio interface is missing. i mean i am uanble to see its radio interface
I really need this urgently.Anybody can help me
05-17-2006 05:37 AM
First verify that the radio module is physically installed in the AP.
Second, what IOS are you running? Or is it VXworks?
05-17-2006 06:49 AM
05-17-2006 08:54 AM
cisco AIR-AP1231G-A-K9 (PowerPC405GP) processor (revision A0) with 14838K/1536K bytes of memory.
Processor board ID FOC09501XL4
PowerPC405GP CPU at 196Mhz, revision number 0x0145
Last reset from power-on
1 FastEthernet interface
1 802.11 Radio(s)
That was from an AP with the radio installed.
Your config
cisco AIR-AP1230B-E-K9 (PowerPC405GP) processor (revision A0) with 14326K/2048K bytes of memory.
Processor board ID FOC07410KFY
PowerPC405GP CPU at 196Mhz, revision number 0x00C4
Last reset from power-on
Bridging software.
1 FastEthernet/IEEE 802.3 interface(s)
32K bytes of flash-simulated non-volatile configuration memory.
Yours doesn't show a radio module installed,
You need a radio module
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide