cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
552
Views
0
Helpful
4
Replies

1200 Series Access points

Greg Johnson
Level 1
Level 1

I have an problem with multiple access points losing the ability to telnet to them.They access points work fine but the only way I can get the ability to telnet back is to restart them. Has anyone else had this problem.

4 Replies 4

SJessulat_2
Level 1
Level 1

Hi,

what kind of authentication do you use for the vty lines (local, radius, ...).

The easiest way would be to paste the config here, or at least a part of it.

Regards,

Sebastian

I am using Radius. This is what the config looks like.

Thanks for your help Greg

line con 0

password 7 110B15041317

login authentication local_auth

transport preferred all

transport output all

line vty 0 4

password 7 104C05180112

login authentication rad_auth

transport preferred all

transport input all

transport output all

line vty 5 15

password 7 104C05180112

login authentication rad_auth

transport preferred all

transport input all

transport output all

Any chance you're maxing out your telnet sessions? It seems unlikely that you'd be hitting 16 unless you telnet around a lot each day and never log out. Still, might be worth checking out.

You could enable SSH and try to connect that way, maybe it makes a difference.

Additionally, if it is possible, connect via console when you're not able to telnet an AP and check the system output.

Review Cisco Networking for a $25 gift card