07-14-2011 09:27 AM - edited 07-03-2021 08:26 PM
Hi,
In the WLC 2112, I can connect Access Points in the available port.
For example:
WLC Port 1 --> Connected to Switch (802.1Q)
WLC Port 5 --> AP vlan 50 (access mode)
WLC Port 6 --> AP vlan 50 (access mode)
WLC Port 7 --> AP vlan 50 (access mode)
Thanks
Solved! Go to Solution.
07-14-2011 09:34 AM
Hi ,
Its works but not supported by TAC and not recommended as well.. please refer the doc authered by lee johnson..
https://supportforums.cisco.com/docs/DOC-11760
Lemme know if this answered ur question and please dont forget to rate the usefull posts!!
Regards
Surendra
07-14-2011 09:34 AM
Hi ,
Its works but not supported by TAC and not recommended as well.. please refer the doc authered by lee johnson..
https://supportforums.cisco.com/docs/DOC-11760
Lemme know if this answered ur question and please dont forget to rate the usefull posts!!
Regards
Surendra
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide