2100 Wireless LAN Controllers

[ricardorojas123]

Hi,

In the WLC 2112, I can connect Access Points in the available port.

For example:

WLC Port 1 --> Connected to Switch (802.1Q)

WLC Port 5 --> AP vlan 50 (access mode)

WLC Port 6 --> AP vlan 50 (access mode)

WLC Port 7 --> AP vlan 50 (access mode)

Thanks

[Surendra BG · Accepted solution]

Hi ,

Its works but not supported by TAC and not recommended as well.. please refer the doc authered by lee johnson..

https://supportforums.cisco.com/docs/DOC-11760

Lemme know if this answered ur question and please dont forget to rate the usefull posts!!

Regards

Surendra