06-15-2021 10:52 PM - edited 07-05-2021 01:27 PM
Anyone running a 2504 WLC, with code level 8.5.171.0?
On mine, the graphic for the front of the device on the Monitor --> summary page is missing. It's always been there in older code versions. I looked in the page source and found that it should be "/images/controller_2504.gif", but trying to load that url directly in the browser gives me a 404. The gif graphics for the green and red ports (2504_green_port.gif and 2504_red_port.gif) are there though, and display in the web page.
This doesn't seem to be a functional problem, but it's irritating.
Thanks in advance!
06-16-2021 12:37 AM
Use different browser.
06-16-2021 03:29 AM
Clear the cache and try again, or have you get chance to try different browser or different device and confirm ?
06-16-2021 08:20 AM
I've tried through several browsers. Same result.
If I hit the URL path to the graphic directly as listed in the HTML source, I get a 404 error, indicating that it doesn't exist on the WLC.
06-16-2021 09:03 AM
is this after upgrade ? i do have 8.5.151.0 with different model WLC works as expected. (there are some 404when you hit F12) - but i can see the device, you not seeing the image of Controller i guess ?
06-16-2021 11:05 AM
That is broken on that code. There has been a few post on the forum about that and I also do have a 2504 with that same issue. Wait until a new firmware is out or downgrade if it bothers you.
03-06-2024 02:47 AM
Same as in version 8.5.182.0!
Version 8.5.164.0 is fine...... try this one:
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide