07-18-2017 12:09 PM - edited 07-05-2021 07:21 AM
hello,
a customer uses PI 2.1, WLC 2504 8.2.151.0 and AP 3502I and 2602I.
Now he bought an AP 2802I. after upgrading the WLC to 8.2. the AP works fine.
But the AP is not discovered by the PI. In PI in the Audit Status of the WLC the AP Name and Mac are detected, but the Status is "In Downloading State".
Is it necessary, that PI also supports AP Types which are discovered via WLC? Which PI Version is needed? 3.1?
thx for help
Nico
Solved! Go to Solution.
07-18-2017 11:40 PM
Hi
Pls refer below compatibility matrix
I would suggest PI 3.2 if you have opportunity to upgrade
http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/3-2/release/notes/cpi_rn.html
Since there is no direct upgrade path from 2.x to 3.2, I would suggest you to fresh build on 3.2 and then import maps from existing 2.1 system to new setup. Below is the PI 3.2 quick start guide for your reference
http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/3-2/quickstart/guide/cpi_qsg.html
HTH
Rasika
*** Pls rate all useful responses ***
07-18-2017 11:40 PM
Hi
Pls refer below compatibility matrix
I would suggest PI 3.2 if you have opportunity to upgrade
http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/3-2/release/notes/cpi_rn.html
Since there is no direct upgrade path from 2.x to 3.2, I would suggest you to fresh build on 3.2 and then import maps from existing 2.1 system to new setup. Below is the PI 3.2 quick start guide for your reference
http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/3-2/quickstart/guide/cpi_qsg.html
HTH
Rasika
*** Pls rate all useful responses ***
08-07-2017 07:07 AM
Hello Rasika,
you're right. obviously we need to upgrade PI 2.1 to PI 3.2. :(
I will talk to the customer.
thx for your help.
Nico
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide