05-05-2023 05:42 AM
Hi All,
Just running into a few issues with a lab and wondered if anyone had seen this before. The AP is trying to join the 9800 WLC but is getting the following message.
*May 5 12:19:28.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: 10.100.0.22 peer_port: 5246
*May 5 12:19:28.299: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: 10.100.0.22 peer_port: 5246
*May 5 12:19:28.299: %CAPWAP-5-SENDJOIN: sending Join Request to 10.100.0.22
*May 5 12:19:33.299: %CAPWAP-5-SENDJOIN: sending Join Request to 10.100.0.22
*May 5 12:19:33.319: %DTLS-5-ALERT: Received WARNING : Close notify alert from 10.100.0.22
*May 5 12:19:33.319: %DTLS-5-SEND_ALERT: Send FATAL : Close notify Alert to 10.100.0.22:5246
Not in Bound state.
The AP is running the latest code for the 3702i and the WLC is running the last supported code 17.3.5a (to my knowledge).
Thanks
George
05-05-2023 05:47 AM
05-05-2023 10:53 AM
17.3.6 solved that problem but unfortunately hit another issue this - https://community.cisco.com/t5/wireless/ios-xe-17-9-3-has-been-released/td-p/4795844
https://quickview.cloudapps.cisco.com/quickview/bug/CSCwd80290
So anyone that googles this worth just going to 17.9.3
05-05-2023 03:27 PM
I would not be wasting any more time with 17.3.X (for 1700/2700/3700/1570 support).
Upgrade to 17.9.3 and start testing that.
05-06-2023 09:11 AM
Absolutely second that - avoid 17.3, go direct to 17.9.3 (or later) for wave 1 AC APs.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide