3850 Catalyst GUI Timeout

[Elnook]

Hi,

I downgraded to 16.3.9 on a 3850 for a lab environment as I want to use for its AP capabilities,  as soon as I log into the GUI it gives me "Your session has timed out, please log in again"

Any suggestions?

[ammahend]

start with some basic checks, make sure http and https services are configured and web auth is set to local with priv 15 credentials.

switch# configure terminal
switch(config)# ip http server
switch(config)# ip http secure-server
!
switch# configure terminal
switch(config)# username your_username privilege 15 secret your_password
!
switch(config)# ip http authentication local

[Elnook]

Thanks for your response Ammahend, those statements are already in my config.

[ammahend]

looks buggy, can you try to restart HTTP service and try incognito

[marce1000]

  - Review this documentation  : https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3850/software/release/3se/wlan/configuration_guide/b_wlan_3se_3850_cg/b_wlan_3se_3850_cg_chapter_0110.html
 

 M.

[Elnook]

Once I log in I am presented with the message and I cant do anything other that click ok. I was able to login to the GUI with no issues before I downgraded to 16.3.9 from 16.12.09. Th only reason I did that was so I can work with AP in a lab environment. 

[marce1000]

   -  Check the logs on the 3850 when that happens , 

    M.

[Elnook]

The logs look normal reporting when I log in successfully no errors. I just upgraded to the latest software 16.12.11 the web interface is running fine and ordered a slightly used 4400 Series Wireless LAN Controller AIR-WLC4402-12-K9 for my lab learning. I appreciate all the help here thanks all!!!!!!!!

[marce1000]

             >....The logs look normal reporting when I log in successfully no errors. 
  - Have a try by defining another admin user (name) for GUI access , with local authentication (no radius - e.g.)

 M.

[Rich R]

Did you try incognito (private browsing) as @ammahend suggested?
This is most likely a browser/caching/cookies issue.
Also try clearing history and cache and cookies.
If that doesn't help it may be a browser incompatibility so you might need to run an older browser version to support the old software version - I'd generally suggest Firefox.