AIR-AP3802I-A-K9 Software Capwap

[martcorrea]

Hola, tengo un Ap AIR-AP3802I-A-K9 con el software de mobility express pero requiero asociarlo a la WLC 5508 esta con version 8.5.171.0, revisando la Compatibility Matrix este modelo si es compatible.

¿Me podria ayudar para cargar la version en modo Lightweight?

Agradezco de antemano

[Kasun Bandara]

@martcorrea hi, you can reset the 3802 AP and connect to network. it will connect to WLC automatically. make sure your WLC is ready before connect AP.

[ammahend]

Sigue los pasos de este vídeo, es un poco largo pero cubre todos los detalles.

[Rich R]

From Mobility Express CLI type:
apciscoshell
Login to the AP CLI using the AP username and password you setup initially (if not left as Cisco/Cisco) then:
ap-type capwap
AP is the Master AP, system will need a reboot when ap type is changed to CAPWAP
. Do you want to proceed? (y/N)
y
<AP reboots as a standard CAPWAP AP>

Then after the AP has rebooted as standard CAPWAP AP:
capwap ap erase all
This command will clear ap config and reboot the AP.
Are you sure you want continue? [confirm] <press enter>
Config Factory Reset triggered: clear saved config files..
AP Rebooting: Reset Reason - Factory Reset

Then as long as you have set DHCP option 43 (preferred option) the AP will discover the WLC and begin downloading the correct image version from the WLC.

Refer to https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/8-2/b_Mobility_Express_Deployment_guide/b_Mobility_Express_Deployment_guide_chapter_01100.html#task_CD04E8319602439D973B7D7ACE23111D

The other option to convert all APs connected to the Mobility Express is to enter the command on ME CLI:

config ap unifiedmode <WLC_name> <WLC_ip_address>