06-13-2012 03:42 AM - edited 07-03-2021 10:17 PM
Hi
My customer has a 4402-25-K9 and need a backup (failover) controller to avoid data transmision break when primary controller goes down.
4402 are end of sale so I have a question can I use 5508 to get Controller Failover Protection with 4402 ?
regards
Marcin
Solved! Go to Solution.
06-13-2012 05:59 AM
Hi Marcin,
Yes, this is a supported configuration. Have a look at this recent thread
https://supportforums.cisco.com/message/3650138#3650138
Cheers!
Rob
"Show a little faith, there's magic in the night" - Springsteen
06-13-2012 05:59 AM
Hi Marcin,
Yes, this is a supported configuration. Have a look at this recent thread
https://supportforums.cisco.com/message/3650138#3650138
Cheers!
Rob
"Show a little faith, there's magic in the night" - Springsteen
06-13-2012 06:07 AM
Hi Rob!
Thanks a lot for your help! I couldn't find this similar thread but I know what I need to know
Best regards
Marcin
06-13-2012 06:45 AM
Hi Marcin,
You are most welcome my friend I think the great NetPros in this thread
offer some excellent tips and strategies for this plan as well as the restrictions
you will encounter moving forward. You will likely want to make the 5508 the
primary controller with an eye on moving away from the 4400 at some point
due to it's EoL and inability to run the latest code versions.
Cheers!
Rob
"Show a little faith, there's magic in the night" - Springsteen
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide