Wireless

When I'm trying to move building to new campus I'm getting below error:"Error(s): You must correct the following error(s) before proceeding:Error:Unknown Exception Occurred. If the problem persists please send logs to the Tech Support.Error:Detail: R...

HelloI'm trying to setup channel group containing multiply timeslots on 2651XM using ITP IOS.All is well till trying to setup the encapsulation with the following errors shown : ITP2(config)#int se0/0:0ITP2(config-if)#enc mtp2Error in encaps setup.  ...

I have a WLC5508 controller with LAP1142N, LAP1262N, CAP3602I, CAP3502E and CAP3501I APs. It seems when a site loses power or connectivity to the controller, some of the APs reconnect and some do not. At some sites all do and at some sites some do an...

Hi,I'm wondering if the 5508 wlan controller can send me notifications of wap up/down conditions? I'm trying to provide a monitoring solution for a client who has the 5508 controller, and I was looking at WCS, but this line of the WCS literature thre...

I'm trying to explore options for how to pull reports on how many users/devices are connecting to a specific SSID a day.It looks like WCS might be able to do that...being replaced by Prime Infrastructure which I think should be able to do it too.I'm ...

Hello Team;          Is there any way that we can disable SSHv1 in Cisco Wireless LAN Controller and only allow SSHv2.

Dear All, I am facing a problem with my Macbook pro.  my cabin has one Access Point (cisco 1142) and one access point is on meeting room. Whenever i take my laptop to the meeting room it gets disconnected . Both the AP are broadcasting at 2.4 and 5 G...

Hi, We are about to install few 3602e device in one mall (shopping centre) and I need some good external antennas to have better coverage. Any suggestions ? Another question is what to use outdoor, because Aironet 3600 is indoor stuff. RegardsSergio

I'm working on a new wlc installation for a customer. I've create a wlan with a customized web-auth. page that uses an external freeradius sms gw. I've setup FlexConnect, so the wlan is locally switched but the WLC is the authenticator.The problem is...

I have problem with my wlc 4402 (version 6.0.199.4) . i use freeradius version 2.1.12 for authentication users .unfortunately client can"t connected  so can any one give me  exemple of configuration EAP-tls in controller Thanks.

Hi guys, I have a customer with a WLC 2125, with the version 6.0.199.4 and I will now upgrade to the version 7.0.250.0 but i wondering if it´s possible to make a backup for the old image, (i already download the configuration, but not the image) It´s...

I built a new PI 2.1 (OVF) and imported the config from the running 1.3 instance. Everything is fine except that the tftp server refuses to work. It will not serve files, nor can I put file in it.  All of our WLC backups are failing. Using a tftp cli...

Just labbing up some ISE scenariosWhen I creat guest users they are in the identity store. If I use AD obviously they are in AD. However when I have a user self provision I cannot find the identity? Where are self provisioned identities stored? They ...

Hi Folks,Has anyone experienced with Poe option for external AP 1532i? I am planning to have a switch such as 3650 connecting AP which are poe+ and not upoe switches. But it seems from Cisco documentation that this AP support only upoe?http://www.cis...

Hi, My customer have some iphone ( iOS 7.1 ) with same problem. it was difficult to associate to WLAN with wep key security. But no problem if access to another one WLAN ( WPA2 personal ). The wireless controller is WiSM ( 7.0.220.0 ). Is there any o...