cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
313
Views
10
Helpful
3
Replies
James_1
Beginner

A Copper and a Fiber SPF's in a WLC 5520

Does anyone know if I can use a Cisco GLC-T-10G SFP (Copper 10Gig) in one port and use an SFP-10G-SR (10Gig Fiber) in the other port? or does it have to be the same media in both ports.

I know the Documentation says it only supports GLC-T SFP's, but i have a few GLC-T-10G in inventory, I wanted to check before I submitted an order.

 

 

Thanks for your help.

2 ACCEPTED SOLUTIONS

Accepted Solutions
Rasika Nayanajith
VIP Mentor

These controllers SFP compatibility is strict. If the document says it will work with only a certain SFP models, that is the only model it is going to work. (as an example, 9800 RP ports, Cisco specific particular Cisco SFP model, I tried 3rd party brand SFP of the same type, did not work)

Anyway, you can give it a try.

 

HTH

Rasika

 

 

 

 

 

View solution in original post

Leo Laohoo
VIP Community Legend

GLC-T must be on Port 1 for SFP to work. 

GLC-TE is not going to work -- It MUST BE GLC-T.

View solution in original post

3 REPLIES 3
Rasika Nayanajith
VIP Mentor

These controllers SFP compatibility is strict. If the document says it will work with only a certain SFP models, that is the only model it is going to work. (as an example, 9800 RP ports, Cisco specific particular Cisco SFP model, I tried 3rd party brand SFP of the same type, did not work)

Anyway, you can give it a try.

 

HTH

Rasika

 

 

 

 

 

View solution in original post

Leo Laohoo
VIP Community Legend

GLC-T must be on Port 1 for SFP to work. 

GLC-TE is not going to work -- It MUST BE GLC-T.

View solution in original post

James_1
Beginner

Thanks for the reply everyone. I guess im rescheduling my maintenance this weekend until i get the supported SFP's in.

Content for Community-Ad

This widget could not be displayed.