Welcome to the Cisco Community Ask Me Anything Event Welcome to the Cisco Community Ask Me Anything conversation. Submit your questions from Monday, September 14, 2026 through Monday, September 28, 2026. Our experts Shree Hari AB and Suman Sinha wi...
I want to implement CURWB on 200Km track/road with only one single autonomous truck at a time with minimum data rate 6mbps and min -96dbm coverage with fluidity feature. What Radio should i select, what would its range in km. This will help me out to...
Hiwe have an WLC behind a firewall and are setting up a tunnel from the WLC with a 3rd party WLC behind their Firewall, when the secure tunnel is established between the WLC's if a user wants to connect at the 3rd party side where they are broadcasti...
Hi everyone,My ISP requires to insert option 82 to every clients' DHCP request, so I was trying to configure that on my 9800-80 controller. No issues with the Remote Agent ID, I was able to insert eth_apmac and ssid. But I can't seem to find how to i...
We have a line of config that we want removed from 100's of devices. Can Prime facilitate this? If so, where do I go? Thanks!
Hello All,One of my clients is having some issues at the moment.For context: The client is a multinational with branch locations nationwide. We have one controller resident at the head office, all the access points at the different locations are regi...
Hello, We want to set all lightweight APs time zone which are registered with 9800 controller.In AirOS controller we can do this with command "config ap timezone enable use-controller all" Is there any equivalent command for WLC 9800 or any other wor...
HiI have a task to be doing Wifi installation in a warehouse.The warehouse is 100 m x 52 m.Hight is 12 meter.The AccessPoints it going to be 2802E, but i cant decided if is best to use omni diretional antennas, or diretional with one in each end of t...
Hi, we recently purchased a new 9800 controller that replaces the old 5520. All of our APs are model 1830, do I need to buy a special license for the controller or AP for them to work together, how do I check what license is on our AP 1830 (there is ...
new 2802i AP installed in remote branch. Finds WLC via DHCP option 43. After I get it configured to be flex connect, the WLAN that I have 802.1x configured on isn't working. Looking at my NAS it's saying that the IP address of the AP is sending the R...
You’ve been hearing about it and now you can finally order the CW9162I-MR, our ultra-high performance 2x2:2 tri-band (2.4/5/6 GHz) Wi-Fi 6E indoor wireless access point.The CW9162I-MR leverages the 6 GHz band expansion to create a more reliable, high...
Can anyone recommend a 5G modem for use in the UK ?Will initially be used to connect a new office up using a 4331 router onsite and once the fixed line is in place, it will become the backup line.Not after any bells or whistles, all switching and WiF...
Hallo,What is the correlation between 'VLAN Support' and OfficeExtend AP in WLC? When one is enabled, the other is disabled but I can't find a proper documentation on the reason behind it.I'll appreciate a response.
i have a Mobility Express deployment and have just added an 1810w in local mode, how do I enable the 3 local switch ports including Poe?
Hello,Did anyone try to use or configure AP1815W LAN ports in Mobility Express deployment? Is it possible?
The situation for the client is: HA 10.24.110.249WLC1; 10.24.110.251; WLC2 10.24.110.252; I'm observing. The Ip . 251 is how stanby ?I guues the correct stanby wiil be ip .252, I suppose. why the ip 251 is how stanby ?Additionally, I can see that th...
