06-28-2024 12:34 AM
The following errors are logged on the Catalyst9120 AXI:
ERR: rdpa_cpu_tx_port_enet_lan # 213: rdpa_cpu_tx_port_enet_lan failed. rdd_rc=120 tx_rdd_error_count=2049
What is the cause of this error and what should I do?
Solved! Go to Solution.
06-28-2024 02:30 AM
06-28-2024 05:22 AM
- Also look at the software version being used on the Catalyst 9120 AXI ; use latest advisory , check if that can help to make the particular error message go away ,
M.
06-30-2024 09:02 AM
Are you actually experiencing some problem with that AP?
If not then don't worry about minor errors in AP logs which are intended mostly for TAC and developers.
If there is an actual problem then describe the problem in detail and include the software version and WLC model details.
As Marce says make sure your software is up to date as per the TAC recommended link below.
06-28-2024 02:30 AM
07-02-2024 07:33 PM
Thank you for your comment.
I will check with what you told me.
06-28-2024 05:22 AM
- Also look at the software version being used on the Catalyst 9120 AXI ; use latest advisory , check if that can help to make the particular error message go away ,
M.
06-30-2024 09:02 AM
Are you actually experiencing some problem with that AP?
If not then don't worry about minor errors in AP logs which are intended mostly for TAC and developers.
If there is an actual problem then describe the problem in detail and include the software version and WLC model details.
As Marce says make sure your software is up to date as per the TAC recommended link below.
07-02-2024 07:35 PM
Thank you for your comment.
As you pointed out, there are explicit impacts
No, I will check with what you told me.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide