cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1154
Views
0
Helpful
2
Replies

About WLC, ACS, ISE Matrix

KakaoTalk_20190612_174342863.pngKakaoTalk_20190612_174345675.png

https://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.html

 

Matrix information I have confirmed is as above.

What is the difference between Software Matrix and Solution Matrix?

Also, if you follow the screenshot above, cannot i use the 5508 8.3 version with ACS4.2 , ISE 2.6 ???

I think that's possible.

If ACS 4.2, WLC 8.3, ISE 2.6 are available, what does the Matrix above mean?

2 Replies 2

hslai
Cisco Employee
Cisco Employee

I moved your post to Wireless Security and Network Management, because the doc is created by our wireless teams.

The two particular tables seem no longer being updated, as the converged access solution/software is not available in later IOS-XE releases. I would suggest you to start looking into Cisco Catalyst 9800 Series Wireless Controllers.

patoberli
VIP Alumni
VIP Alumni
The matrix shows the supported configurations. That doesn't necessarily mean it's not working, but it might be untested and you might not get support.
Also the Matrix gets less often updated than there are software releases. It's always a little lagging behind.
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: