cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1421
Views
2
Helpful
3
Replies

Access Points not registering with WLC

deepakdubbas
Visitor

Access points are not able to join to WLC from a specific location, but where as same model of AP's are registered and are working,

WLC model -- AIR-CT5508-K9

AP Model--AIR-AP1252AG-A-K9

WLC IOS version -- 8.0.135.0

 we have 5 to 8 No's on same model AP's none of them are working, we tried resetting, erasing the files from flash, configuring Manually. but Registeration is not happening. similar models are available at other locations which are registed with this same WLC, but we are experiencing the issue with only specific location

But Ap's are pinging from WLC and from APconsole we can ping WLC IP address.

Please suggest a way forward

Thank you.

 

1 Accepted Solution
3 Replies 3

ThanK you Leo, Let me try the suggested work around steps, will keep posted as we implement the changes.

Thanks again for this info.

Note that for a permanent resolution to the issue you need to follow all the steps in the field notice including configuring:
config ap cert-expiry-ignore {mic|ssc} enable

------------------------------
Please click Helpful if this post helped you and Accept as Solution (drop down menu at top right of this reply) if this answered your query.
------------------------------
TAC recommended codes for AireOS WLC's   and   TAC recommended codes for 9800 WLC's
Best Practices for AireOS WLC's,   Best Practices for 9800 WLC's   and   Cisco Wireless compatibility matrix
Check your 9800 WLC config with Wireless Config Analyzer using "show tech wireless" output or "config paging disable" then "show run-config" output on AireOS and use Wireless Debug Analyzer to analyze your WLC client debugs
Field Notice: FN63942 APs and WLCs Fail to Create CAPWAP Connections Due to Certificate Expiration
Field Notice: FN72424 Later Versions of WiFi 6 APs Fail to Join WLC - Software Upgrade Required
Field Notice: FN72524 IOS APs stuck in downloading state after 4 Dec 2022 due to Certificate Expired
- Fixed in 8.10.196.0, latest 9800 releases, 8.5.182.12 (8.5.182.13 for 3504) and 8.5.182.109 (IRCM, 8.5.182.111 for 3504)
Field Notice: FN70479 AP Fails to Join or Joins with 1 Radio due to Country Mismatch, RMA needed
Field Notice: FN74383 APs Running 17.12.4/5/6/6a May Run Out of Flash Space Preventing Upgrades
How to avoid boot loop due to corrupted image on Wave 2 and Catalyst 11ax Access Points (CSCvx32806)
Field Notice: FN74035 - Wave2 APs DFS May Not Detect Radar After Channel Availability Check Time
Leo's list of bugs affecting 2800/3800/4800/1560 APs
Default AP console baud rate from 17.12.x is 115200 - introduced by CSCwe88390
Review Cisco Networking for a $25 gift card