Adding a C9115 to a Cisco ISR 1100 Router

[90-Lowrider]

I have a Cisco C1111-8PWA router running 17.12.4.  I recently initialized the wireless module (ISR-AP1100AC-A) that is running 8.8.100.0 but can't get the C9115AXI-B to work with it.  I receive an endless list of error messages (view attached) and have tried resetting the AP using the mode button several times but it still does not work

[liviu.gheorghe]

Hello @90-Lowrider ,

Can you attach the error messages? Also can you share the C1111-8PWA sanitised configuration?

[90-Lowrider]

The error messages are in the picture I attached.  When I access the AP through the console port I get an unending stream of messages and cannot get to the command prompt so I'm not sure how to capture an error log.  running config is attached

[marce1000]

  - That won't work according to : https://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.html
    >...

Access Points	PID	First AireOS Release Support	Last AireOS Release Support	First Cisco IOS XE Release Support	Last Cisco IOS XE Release Support

9115	C9115AXI-x	8.9.100.0	8.10.x	Cisco IOS XE Gibraltar 16.11.1b	—
	C9115AXE-x		8.10.x		—

    8.8.x is not compatible

 M.

[90-Lowrider]

The router came with 16.  I upgraded to 17.  did that also change the AireOS?  What do I have to do to make it work?  Upgrade the AireOS  on the wireless module?

[Rich R]

The AP software is separate from the router software so needs to be upgraded independently from the router.

Check the config guide:
https://www.cisco.com/c/en/us/td/docs/routers/access/isr1100/software/configuration/xe-17/isr1100-sw-config-xe-17/configuring_wlan.html

Upgrade the AP software to EWC 8.10.196.0 which will support the 9115 AP (the embedded AP is a built-in version of the 1815i AP) - use the contents of the zip file for upgrade:
https://software.cisco.com/download/home/286306794/type/286289839/release/8.10.196.0
If direct upgrade fails (common bug with Mobility Express as it runs out of flash space) then first convert it to CAPWAP mode and upgrade using https://software.cisco.com/download/home/286306794/type/286288051/release/15.3.3-JK11 then convert back to ME using the ME tar file image (not the zip file).

Some other links which might be useful:
https://www.itnetworks.com.au/blog/cisco-isr-1100-internal-wap/
https://www.youtube.com/watch?v=pxuS7haLpow

[90-Lowrider]

This is awesome!  Thanks!  I will follow to the letter when I can get to the machine later in the week