07-24-2019 03:13 PM - edited 07-05-2021 10:44 AM
Hellol,
I have a new AIR-AP1852I-B-K9 and want to add it to the rest of the APs in cisco wirelss controller 2500.
I thought there should be a place in web UI to add mac address and that should do everything else.
please help. thanks
Solved! Go to Solution.
07-26-2019 05:40 PM
07-31-2019 08:07 AM
-Regards,
Kamaljeet
07-24-2019 09:55 PM
1. connect the AP to swicth in smae vlan as other APs are.
AP should get IP and WLC IP to join .......if not
then paste the output of these commands:
sh sysinfo from WLC
sh version from AP
complete boot-up process from AP console.
Regards
Dont forget to arte helpful posts
07-25-2019 12:11 AM
07-26-2019 12:00 AM
07-26-2019 06:39 AM
show license all
License Store: Primary License Storage
StoreIndex: 0 Feature: base Version: 1.0
License Type: Permanent
License State: Active, Not in Use
License Count: Non-Counted
License Priority: Medium
License Store: Primary License Storage
StoreIndex: 0 Feature: base-ap-count Version: 1.0
License Type: Permanent
License State: Inactive
License Count: 5 / 0 (Active/In-use)
License Priority: Medium
License Store: Primary License Storage
StoreIndex: 0 Feature: base-ap-count Version: 1.0
License Type: Permanent
License State: Active, In Use
License Count: 3 0 / 30 (Active/In-use)
License Priority: Medium
License Store: Evaluation License Storage
StoreIndex: 1 Feature: base-ap-count Version: 1.0
License Type: Evaluation
License State: Inactive
Evaluation total period: 12 weeks 6 days
Evaluation period left: 12 weeks 6 days
License Count: 75 / 0 (Active/In -use)
License Priority: None
07-26-2019 07:21 AM
07-26-2019 08:59 AM - edited 07-26-2019 09:00 AM
(Cisco Controller) >show license capacity
Licensed Feature Max Count Current Count Remaining Count Remaining Capacity
-------------------------------------------------------------------------------- ---------
AP Count 30 22 8 33/55
07-26-2019 05:40 PM
07-31-2019 07:24 AM - edited 07-31-2019 07:39 AM
I entered the command and seeing the following
capwap ap primary-base wirelessocntroller01 10.10.0.1
#[*03/18/2017 00:22:03.1678] CAPWAP State: Discovery
[*03/18/2017 00:22:03.1678] Discovery Request sent to 10.10.0.1, discovery ty pe STATIC_CONFIG(1)
[*03/18/2017 00:22:03.1778] Discovery Request sent to 10.10.0.1, discovery ty pe STATIC_CONFIG(1)
[*03/18/2017 00:22:03.1778] Discovery Request sent to 255.255.255.255, discovery type UNKNOWN(0)
[*03/18/2017 00:22:03.1878] Discovery Response from 10.10.0.1
[*07/31/2019 14:18:35.0000] Discovery Response from 10.10.0.1
[*07/31/2019 14:18:35.0000] CAPWAP State: DTLS Setup
[*07/31/2019 14:18:35.2199] CAPWAP State: Join
[*07/31/2019 14:18:35.2199] Sending Join request to 10.10.0.1 through port 52 48
[*07/31/2019 14:18:35.2199] Join Response from 10.10.10.0.1
[*07/31/2019 14:18:35.2199] TLV-DEC-PROC: Info missing for 1363
[*07/31/2019 14:18:35.2799] mount: mounting debugfs on /sys/kernel/debug failed: Device or resource busy
[*07/31/2019 14:18:35.3199] CAPWAP State: Image Data
[*07/31/2019 14:18:35.3499] do PRECHECK, part1 is active part
[*07/31/2019 14:18:35.7398] ..................................................
[*07/31/2019 14:18:54.9138] .......................................
[*07/31/2019 14:19:07.4599] do PREDOWNLOAD, part1 is active part
[*07/31/2019 14:19:10.9888] Verify returns 0
[*07/31/2019 14:19:11.5386] Verify returns 0
[*07/31/2019 14:19:11.5386] Unlocking /dev/mtd4 ...
I see AP joined, what else I need to do to make sure it is working and client are connected to it?
07-31-2019 08:07 AM
-Regards,
Kamaljeet
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide