AIR-BR1310G-E-K9-R and AIR-ANT2460P-R - do we need RF cable?

[kasper123]

Hi,

we have ordered one AIR-BR1310G-E-K9-R and one AIR-ANT2460P-R.

Does the antenna come with an RF cable or do we need to order an additional RF cable?

Also regarding the powering of the device: from what I read the device comes with a power injector. Does this mean that there will only be one FTP cable going towards the device carying both power and the Ethernet signal?

Thank you in advance.

[Surendra BG]

Hi,

By default we give a small co ax cable along with the device.. but if u need a longer one then u have to buy one..

to ur second question the below link will answer..

http://www.cisco.com/en/US/partner/docs/wireless/access_point/1300/installation/guide/130h_c2.html

Lemme know if this answered ur question and please dont forget to rate the usefull posts!!

Regards

Surendra

[kasper123]

Hi Surendra,

In the document you sent I see a dual coax cable is being mentioned.

Does this come with the device or do we have to order it separately?

I see there are some Roof Mount Kit (AIR-ACCRMK1300=) and Wall Mount Kit (AIR-ACCWAMK1300=).

Do we have to buy any of those?

Regards.

[Surendra BG]

Hi,

Yes if we are buying the device brand new we will get the mounting kit and a small lenght co-ax cable as well!! antenna is an accessory and we mat need to but it..

please dont forget to rate the usefull posts and mark it as answerd if so!!

Regards

Surendra

[Surendra BG]

antenna is an accessory and we may need to buy it..

[kasper123]

Hi Surendra,

I didn't quite understand that. Do we have to buy a mounting kit?

From the product description I read that we should get

1-ft dual RG-6 cable assembly (Ethernet uplink from power injector)

Is this enough to get started and have the device installed or do we have to buy the mounting kit?

[Surendra BG]

Mounting kit wil be provided.. but not the antenna.. and yes.. wat ever u get in the BOX is enough to get started!!

Regards

Surendra