AIR-CT5508-250-K9

[Sherdilkhan2015]

Hi Guys,

I have this unit with me I want to check the license but i dont know how to check License in this unit can any body tell me the full process please?

[Leo Laohoo]

Management > Software Activation > License

[Sherdilkhan2015]

That's fine sir, but need to know how to get into management that is the problem dont have idea, can you tell me from scratch the steps please?

[Sandeep Choudhary · Accepted solution]

Login to WLC (Via GUI) and then click on Management > Software Activation > License TABS.

Regards

Dont forget to rate helpful posts

[Sherdilkhan2015]

This is what i got from this command can you please tell me how many license we have on this as it is showing  License Count: 500 / 0 (Active/In-use) what does it means?

(Cisco Controller) >show license evaluation

StoreIndex:  0  Feature: base-ap-count                     Version: 1.0

        License Type: Evaluation

        License State: Inactive

            Evaluation total period:  8 weeks  4 days

            Evaluation period left:  8 weeks  4 days

        License Count: 500 / 0 (Active/In-use)

        License Priority: None

[Sandeep Choudhary · Accepted solution]

Its an evaluation license..

Paste the output of these commands:

show license summary

show license capacity

Regards

Dont forget to rate helpful posts

[Sherdilkhan2015]

(Cisco Controller) >show license summary

License Store: Primary License Storage

StoreIndex:  0  Feature: base                              Version: 1.0

        License Type: Permanent

        License State: Active, Not in Use

        License Count: Non-Counted

        License Priority: Medium

License Store: Primary License Storage

StoreIndex:  1  Feature: base-ap-count                     Version: 1.0

        License Type: Permanent

        License State: Active, In Use

        License Count: 100 /100 (Active/In-use)

        License Priority: Medium

License Store: Evaluation License Storage

StoreIndex:  0  Feature: base-ap-count                     Version: 1.0

        License Type: Evaluation

        License State: Inactive

            Evaluation total period:  8 weeks  4 days

            Evaluation period left:  8 weeks  4 days

        License Count: 500 / 0 (Active/In-use)

        License Priority: None

(Cisco Controller) >show license capacity

Licensed Feature    Max Count         Current Count     Remaining Count

-----------------------------------------------------------------------

AP Count            100               0                 100

(Cisco Controller) >show license expiring

StoreIndex:  0  Feature: base-ap-count                     Version: 1.0

        License Type: Evaluation

        License State: Inactive

            Evaluation total period:  8 weeks  4 days

            Evaluation period left:  8 weeks  4 days

        License Count: 500 / 0 (Active/In-use)

        License Priority: None

Yes please tell me total license showing in this.

[Sandeep Choudhary]

You have total 100 AP license on Cisco WLC.

License Count: 100 /100 (Active/In-use)

All 100 are free to use. No AP is connected to WLC!!

(Cisco Controller) >show license capacity

Licensed Feature Max Count Current Count Remaining Count

-----------------------------------------------------------------------

AP Count 100 0 100

Regards

Dont forget to rate helpful posts