09-09-2014 01:28 PM - edited 07-05-2021 01:30 AM
I recently purchased a AIR-LAP1141N-A-K9. I am going to try it out and see how it works. I know it's not a stand alone ap but what firmware would you recommend loading on it to run it as a stand alone? Also if this works well I am interested in buying a controller and more of these. What controllers are compatible with this unit? I see that the manual says 440x are besides that are there any others?
Thank you
Solved! Go to Solution.
09-09-2014 01:34 PM
Well you should use the last one c1140-k9w7-tar.153-3.JAB.tar
http://software.cisco.com/download/release.html?mdfid=282439881&flowid=6789&softwareid=284180979&release=15.3.3-JAB&relind=AVAILABLE&rellifecycle=ED&reltype=latest
**Please rate useful answers**
09-09-2014 01:34 PM
Well you should use the last one c1140-k9w7-tar.153-3.JAB.tar
http://software.cisco.com/download/release.html?mdfid=282439881&flowid=6789&softwareid=284180979&release=15.3.3-JAB&relind=AVAILABLE&rellifecycle=ED&reltype=latest
**Please rate useful answers**
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide