09-04-2003 01:01 AM - edited 07-04-2021 08:59 AM
Hello,
I need to repeat a signal between a big wall.
AP1-< ~ >-AP2-< ~ >-WGB1
AP1 is root
AP2 is repeater
I know that using a splitter is not recommended in AP2. So on AP2 can I use an directionnal antenna directly attached to Right connector and a second directionnal antenna to Left connector ?
09-10-2003 07:13 AM
The short answer, yes, as long as you have RP/TNC connectors on your AP.
09-10-2003 11:03 PM
I think you are wrong:
The two directionnal antennas cover two different zone, the diversity feature must be set for the two connectors, what happen to one side when the over is communicating ?
ref. "Multipath Distortion" chapter in http://www.cisco.com/en/US/partner/products/hw/wireless/ps469/products_data_sheet09186a008008883b.html
ref. Cisco training guide, "Aironet Wireless Lan Fundamentals ver1.0", page 10-42.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide