Hello,
i have an CAP 2602 with IOS Version ap3g2-k9w7-xx.153-3.JF9
I have access to the GUI but i can not activate the Radios.
When I try it at Easy Setup -> Network Setup - i got a failure.
See---
Thats the default:
Building configuration... Current configuration : 1536 bytes ! ! Last configuration change at 17:54:37 UTC Sun Sep 1 2013 version 15.3 no service pad service timestamps debug datetime msec service timestamps log datetime msec service password-encryption ! hostname ap ! ! logging rate-limit console 9 enable secret 5 $1$k5t3$YaHDVR4gdkoQia.8KG2on0 ! no aaa new-model no ip source-route no ip cef ! ! ! ! dot11 pause-time 100 dot11 syslog ! ! no ipv6 cef ! ! username Cisco password 7 02250D480809 ! ! bridge irb ! ! ! interface Dot11Radio0 no ip address shutdown station-role root bridge-group 1 bridge-group 1 subscriber-loop-control bridge-group 1 spanning-disabled bridge-group 1 block-unknown-source no bridge-group 1 source-learning --More-- no bridge-group 1 unicast-flooding ! ap#sh run Building configuration... Current configuration : 1536 bytes ! ! Last configuration change at 17:54:37 UTC Sun Sep 1 2013 version 15.3 no service pad service timestamps debug datetime msec service timestamps log datetime msec service password-encryption ! hostname ap ! ! logging rate-limit console 9 enable secret 5 $1$k5t3$YaHDVR4gdkoQia.8KG2on0 ! no aaa new-model no ip source-route no ip cef ! ! ! ! dot11 pause-time 100 dot11 syslog ! ! no ipv6 cef ! ! username Cisco password 7 02250D480809 ! ! bridge irb ! ! ! interface Dot11Radio0 no ip address shutdown station-role root bridge-group 1 bridge-group 1 subscriber-loop-control bridge-group 1 spanning-disabled bridge-group 1 block-unknown-source no bridge-group 1 source-learning no bridge-group 1 unicast-flooding ! interface Dot11Radio1 no ip address shutdown station-role root bridge-group 1 bridge-group 1 subscriber-loop-control bridge-group 1 spanning-disabled bridge-group 1 block-unknown-source no bridge-group 1 source-learning no bridge-group 1 unicast-flooding ! interface GigabitEthernet0 no ip address duplex auto speed auto bridge-group 1 bridge-group 1 spanning-disabled no bridge-group 1 source-learning ! interface BVI1 mac-address c067.af88.88a1 ip address dhcp client-id GigabitEthernet0 ipv6 address dhcp ipv6 address autoconfig ipv6 enable ! ip forward-protocol nd ip http server no ip http secure-server ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag ! ! bridge 1 route ip ! ! ! line con 0 line vty 0 4 login local length 0 transport input all ! end
Via CLI it doesn´t work too.
Some ideas?
