05-25-2017 10:34 PM - edited 07-05-2021 07:07 AM
Hi,
Has anyone deployed AP 2800 with ISE 1.X? Any compatibility issue?
Thanks.
05-29-2017 02:53 PM
adimakur,
I'm using Cisco ISE with 2800, and 3800 APs. I have had zero issues with wireless clients authenticating using ISE.
David
05-29-2017 04:00 PM
Hi David,
Can you share your ISE and WLC version please?
Thanks.
05-31-2017 04:43 AM
I was running ISE 1.4 and WLC 8.2.151.0. The version of ISE should not matter since it's only authentication the users. I would HIGHLY recommend using 8.2.151.x on the WLC. This is by far the most stable version of software for the 3802 APs. Cisco just released. 8.4 which I've beta tested for several months now and also works with the 3802 APs.
05-31-2017 04:01 PM
Hi David,
Good to hear it works well with ISE 1.4.
As from "Cisco Aironet Series 2800/3800 Access Point Deployment Guide", minimum ISE version is 2.0 for supporting AP 2800/3800.
Thanks.
03-02-2018 07:00 AM
Hello Adi,
AP 2800 with ISE 1.X
There will be no compatibility issue is you deployed AP 2800 with ISE 1.X
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide