04-12-2011 05:26 PM - edited 07-03-2021 08:04 PM
Hi, everybody.
What is the capacity recomendation for simultanious data users and voice calls with codec G.711 and G.729 on APs Serie 3500?
I need to do a design but I do not find information about this point, In older version of APs I was to readed about it and was 7 and 8 calls.
Thanks for your help.
DS
04-12-2011 05:51 PM
Basically you mean 802.11n.. well.. If I am not wrong for 802.11n radios it was 53 (max) however every call use audio on both side so it shold be 25-26 at the same time, I cant remember were I read this..
Please someone correct me or provide any document that points to this ... I check the 7920 deployment guide but I cannot longer find the table that used to show that and comparing 802.11b -g
04-12-2011 09:39 PM
I will disagree 100% by saying that the 7921 guide is still applicable.
You cannot make more calls on a 3500 than on a 1130 if you use 7921 that are 802.11g and not n.
If you use laptops with soft phones, it's a different story but then you'd need to make sure that the laptops are properly tagging voice traffic and this is rarely happening out of my experience.
Nicolas
04-12-2011 09:44 PM
Nicolas, thanks for lighting up in this post.
Please let me understand why you mean that 7921 are still applicable?
Arent we talking about bandwidth per call?
04-12-2011 10:11 PM
" the 7921 guide is still applicable"
You cannot place more calls with 7921s on a 3500 than on a 1131. The bandwitdh offered is still 54Mbps since the clients are 11g.
04-12-2011 10:16 PM
plop! you are totally RIGHT! I wasnt seen that REALLY IMPORTANT FACT!
+5 for u...
THE FORCE IS STRONG WITH YOU
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide