12-24-2022 05:40 PM
can i convert AP 3700 in to mobility express by changing IOs
12-24-2022 07:26 PM
Nope.
AP2700/3700 can only operate in CAPWAP or autonomous.
12-25-2022 02:20 AM
10-26-2023 05:34 PM
hi
We have 4 floors of office , recently added a WLC to add extra APs . we Rukus ap too .
we have sucessfully configured Cisco APs and it all connected to gateway too and WLc (open Security )and APs got ips
but our issue is when ever a client connects to rukus APs they will get landing page and get connected to internet
but when they connect to cisco AP's they are not getting landing page and they have ip and the status of the connection would be no internet
Gateway ==> WLC 2504 ==> Cisco APs
10-26-2023 07:33 PM
Can you please help me with this thank you
10-27-2023 05:27 AM
@nharish you've not given enough information.
We don't know anything about how your WLC, WLAN and APs are configured or how you're expecting them to work.
For a start make sure your WLC code is up to date - latest available for 2504 is currently 8.5.182.11 (link below)
Then check your WLC config using the config analyzer (link below).
And refer to the config guides to configure the network according to your design requirements.
12-30-2022 04:17 PM - edited 10-27-2023 05:30 AM
The 3700 can be an autonomous AP (standalone) or a CAPWAP (lightweight) AP connected to a Mobility Express WLC.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/8-4/b_cisco_mobility_express_8_4/b_Mobility_Express_Deployment_guide_chapter_0100.html
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide