cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1816
Views
10
Helpful
6
Replies

AP 3700

nharish
Visitor

can i convert AP 3700 in to mobility express by changing IOs

6 Replies 6

Leo Laohoo
Hall of Fame
Hall of Fame

Nope.

AP2700/3700 can only operate in CAPWAP or autonomous.

balaji.bandi
Hall of Fame
Hall of Fame
What is the Cisco ® Mobility Express solution?
A.  Cisco Mobility Express is a virtual wireless LAN controller integrated on 802.11ac Wave 2 access points (Cisco Aironet ® 4800, 3800, 2800, 1850, 1830, 1815, 1560, and 1540 Series).
Simple by design, Mobility Express is a reliable and affordable branch solution for small and medium-sized businesses and distributed enterprises serving up to 100 access points and 2000 clients. It brings the best practices and quality of Cisco’s large- and medium-scale solutions to smaller-scale implementations without additional cost or complexity.

https://www.cisco.com/c/en/us/solutions/collateral/enterprise-networks/mobility-express/q-and-a-c67-734485.html

BB

=====️ Preenayamo Vasudevam ️=====

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

hi 

We have 4 floors of office , recently added a WLC to add extra APs . we Rukus ap too .

we have sucessfully configured Cisco APs and it all connected to gateway too and  WLc (open Security )and APs got ips 

but our issue is when ever a client connects to rukus APs they will get landing page and get connected to internet 

but when they connect to cisco AP's they are not getting landing page and they have ip and the status of the connection would be no internet

Gateway ==> WLC 2504 ==> Cisco APs

 

Can you please help me with this thank you 

@nharish you've not given enough information. 
We don't know anything about how your WLC, WLAN and APs are configured or how you're expecting them to work.
For a start make sure your WLC code is up to date - latest available for 2504 is currently 8.5.182.11 (link below)
Then check your WLC config using the config analyzer (link below).
And refer to the config guides to configure the network according to your design requirements.

------------------------------
Please click Helpful if this post helped you and Accept as Solution (drop down menu at top right of this reply) if this answered your query.
------------------------------
TAC recommended codes for AireOS WLC's   and   TAC recommended codes for 9800 WLC's
Best Practices for AireOS WLC's,   Best Practices for 9800 WLC's   and   Cisco Wireless compatibility matrix
Check your 9800 WLC config with Wireless Config Analyzer using "show tech wireless" output or "config paging disable" then "show run-config" output on AireOS and use Wireless Debug Analyzer to analyze your WLC client debugs
Field Notice: FN63942 APs and WLCs Fail to Create CAPWAP Connections Due to Certificate Expiration
Field Notice: FN72424 Later Versions of WiFi 6 APs Fail to Join WLC - Software Upgrade Required
Field Notice: FN72524 IOS APs stuck in downloading state after 4 Dec 2022 due to Certificate Expired
- Fixed in 8.10.196.0, latest 9800 releases, 8.5.182.12 (8.5.182.13 for 3504) and 8.5.182.109 (IRCM, 8.5.182.111 for 3504)
Field Notice: FN70479 AP Fails to Join or Joins with 1 Radio due to Country Mismatch, RMA needed
Field Notice: FN74383 APs Running 17.12.4/5/6/6a May Run Out of Flash Space Preventing Upgrades
How to avoid boot loop due to corrupted image on Wave 2 and Catalyst 11ax Access Points (CSCvx32806)
Field Notice: FN74035 - Wave2 APs DFS May Not Detect Radar After Channel Availability Check Time
Leo's list of bugs affecting 2800/3800/4800/1560 APs
Default AP console baud rate from 17.12.x is 115200 - introduced by CSCwe88390

Rich R
VIP
VIP

The 3700 can be an autonomous AP (standalone) or a CAPWAP (lightweight) AP connected to a Mobility Express WLC.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/8-4/b_cisco_mobility_express_8_4/b_Mobility_Express_Deployment_guide_chapter_0100.html

 

------------------------------
Please click Helpful if this post helped you and Accept as Solution (drop down menu at top right of this reply) if this answered your query.
------------------------------
TAC recommended codes for AireOS WLC's   and   TAC recommended codes for 9800 WLC's
Best Practices for AireOS WLC's,   Best Practices for 9800 WLC's   and   Cisco Wireless compatibility matrix
Check your 9800 WLC config with Wireless Config Analyzer using "show tech wireless" output or "config paging disable" then "show run-config" output on AireOS and use Wireless Debug Analyzer to analyze your WLC client debugs
Field Notice: FN63942 APs and WLCs Fail to Create CAPWAP Connections Due to Certificate Expiration
Field Notice: FN72424 Later Versions of WiFi 6 APs Fail to Join WLC - Software Upgrade Required
Field Notice: FN72524 IOS APs stuck in downloading state after 4 Dec 2022 due to Certificate Expired
- Fixed in 8.10.196.0, latest 9800 releases, 8.5.182.12 (8.5.182.13 for 3504) and 8.5.182.109 (IRCM, 8.5.182.111 for 3504)
Field Notice: FN70479 AP Fails to Join or Joins with 1 Radio due to Country Mismatch, RMA needed
Field Notice: FN74383 APs Running 17.12.4/5/6/6a May Run Out of Flash Space Preventing Upgrades
How to avoid boot loop due to corrupted image on Wave 2 and Catalyst 11ax Access Points (CSCvx32806)
Field Notice: FN74035 - Wave2 APs DFS May Not Detect Radar After Channel Availability Check Time
Leo's list of bugs affecting 2800/3800/4800/1560 APs
Default AP console baud rate from 17.12.x is 115200 - introduced by CSCwe88390
Review Cisco Networking for a $25 gift card