04-19-2013 12:33 PM - edited 07-03-2021 11:56 PM
Hi
I have a different models of Access-Point, but when occur electrical cut, the ap not associate againt to controller, additional lost a domain and dns. All AP have static ip address, dns and domain.
I configure HA
Regards.
04-19-2013 12:45 PM
Can you explain your setup and what you did to troubleshoot. Can you provide more information and maybe post the output from the console port of the AP.
Sent from Cisco Technical Support iPhone App
04-19-2013 09:00 PM
Console into the AP, reboot the AP and post the entire bootup process.
Maybe the WLC lost it's time and date.
07-14-2013 07:53 PM
Hello,
I agree with Leo that during the electrical cut the WLC must have lost its date and time. Still, post the output from the console port of the AP.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide