08-20-2015 05:09 AM - edited 07-05-2021 03:48 AM
Hello,
I just upgrade a WLC2504 with 3 AP (AIR-LAP1042N-E-K9) to 7.6.130 Release. Everything worked fine.
Now I'm trying to add a new AP (AIR-CAP1702I-E-K9) to my WLC. Access-Point and WLC Mgmt IP are in the same VLAN/subnet. I also configured Option 43 in my DHCP Server.
AP is getting the WLC IP via DHCP but is unable to join it.
I can see in the debug that WLC is answering the CAPWAP request and AP is receiving this message, but after that AP debug says "Could not discover any MWAR".
I already modified the time settings in the WLC, and the "show time" gives me the expected output with actual Date/Time and Timezone.
I attached the debug files for WLC and AP, maybe someone can help.
Thanks for answering,
Kind regards
Nicolas.
Solved! Go to Solution.
08-20-2015 05:25 AM
Go HERE. For 1700 the controller must be running firmware version 8.0.100.X.
08-20-2015 05:25 AM
Go HERE. For 1700 the controller must be running firmware version 8.0.100.X.
08-20-2015 12:23 PM
Hi Leo,
Thank you for the information, I upgraded to 8.0.120 and I worked perfectly. I already installed AP 2700 with 6.7.130 and didn't read the Compatibility Matrix correctly.
Sorry for the wasted time.
Kind Regards,
Nicolas.
08-20-2015 08:52 PM
Thanks for taking the time to rate our posts. :)
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide