AP1852 with ME Image, SSID issue

[Arshi Jamal]

HI, I am using AIR-AP1852-C-K9 Access Point with Mobility Express Software image as controller. The built-in AP is working fine and no other AP is added to the network. I have added two counties US and PK in countries-list. Still AP is NOT broadcasting SSID 802.11b (5GHz). The output of show Sysinfo, 802.11a and 802.11b is attached. Earliest possible from anyone will be highly appreciated. 

[Sandeep Choudhary]

Hi Jamal,

I think you have a wrong regulatory domain AP /WLC.

for paksitan it must be: AIR-AP1852-G-K9

More info here: https://www.cisco.com/c/dam/assets/prod/wireless/wireless-compliance-tool/index.html

Talk with your supplier .

Regards

Dont forget to rate helpful posts

[Arshi Jamal]

Dear Sandeep,

Thanks for your time and reviewing my issue. I understand that "C" is not for Pakistan. I have tried using "UA" and "AE" but same status. Could you please confirm what country-code should I use to resolve this issue?

[patoberli · Accepted solution]

Interesting, this model AIR-AP1852-C-K9 doesn't exist as per the compliance tool, but maybe it wasn't updated.
In any case, try China as country.

[Arshi Jamal]

Finally I managed it by using BH, US in country code list.