02-04-2016 05:52 AM - edited 07-05-2021 04:34 AM
Hi
I have a question about running an AP 2702i in Full power (16.8 W) regarding Medium Power (15.4W)
Are there any great performance gain in higher Power ?
Regards
Johan
Solved! Go to Solution.
02-04-2016 08:25 PM
Hi Johan,
Pls refer below document for this, refer table 7 as shown below number of radio chains will be different those power level
If you got > 15.4W then 4x4:3 on 5G & 3x4:3 on 2.4G
if you got <=15.4W then 2x2:2 on 5G & 2x2:2 on 2.4G
http://www.cisco.com/c/en/us/td/docs/wireless/technology/apdeploy/8-0/Cisco_Aironet_3700AP.html
HTH
Rasika
*** Pls rate all useful responses ***
02-04-2016 08:25 PM
Hi Johan,
Pls refer below document for this, refer table 7 as shown below number of radio chains will be different those power level
If you got > 15.4W then 4x4:3 on 5G & 3x4:3 on 2.4G
if you got <=15.4W then 2x2:2 on 5G & 2x2:2 on 2.4G
http://www.cisco.com/c/en/us/td/docs/wireless/technology/apdeploy/8-0/Cisco_Aironet_3700AP.html
HTH
Rasika
*** Pls rate all useful responses ***
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide