cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
653
Views
0
Helpful
2
Replies

Authentication Failure - 1 Client - Guest SSID with NO Encryption.

Nick C.
Beginner
Beginner

After factory resetting my phone (Samsung S8) stopped connecting to WIFI in the area I sit. So far everyone else (except for 1 other samsung user) is able to connect. This has been working for 3+ yrs, and no changes to the WLC or AP's.  I can walk around my building and hit 20+ other AP's Guest SSID with no issue, soon as I return to my desk the connection will just drop, even with good signal. My phone will say Authentication Failure, sometimes after 20+ tries it will connect, but just briefly before being kicked off.

 

Can someone please help with the debug? I think this is the part of the debug where I'm dis-associated.

 

Line 3176: *apfMsConnTask_0: Jan 28 15:59:45.063: a0:cc:2b:08:96:31 apfProcessAssocReq (apf_80211.c:9614) Changing state  for mobile a0:cc:2b:08:96:31 on AP e8:ed:f3:04:32:50 from Associated to Associated


Line 3176: *apfMsConnTask_0: Jan 28 15:59:45.063: a0:cc:2b:08:96:31 apfProcessAssocReq (apf_80211.c:9614) Changing state   for mobile a0:cc:2b:08:96:31 on AP e8:ed:f3:04:32:50 from Associated to Associated

 

Line 3178: *pemReceiveTask: Jan 28 15:59:45.063: a0:cc:2b:08:96:31 172.16.3.250 Added NPU entry of type 1, dtlFlags 0x0

Line 3179: *spamApTask3: Jan 28 15:59:45.063: a0:cc:2b:08:96:31 Successful transmission of LWAPP Add-Mobile to AP e8:ed:f3:04:32:50

 

Line 3180: *spamApTask3: Jan 28 16:00:13.046: a0:cc:2b:08:96:31 Received DELETE mobile, reason MN_AP_AUTH_STOP, from AP e8:ed:f3:04:32:50, slot 1 ...cleaning up mscb

 

Line 3181: *spamApTask3: Jan 28 16:00:13.046: a0:cc:2b:08:96:31 apfMsDeleteByMscb Scheduling mobile for deletion with deleteReason 15, reasonCode 1

 

Line 3183: *spamApTask3: Jan 28 16:00:13.047: a0:cc:2b:08:96:31 Scheduling deletion of Mobile Station:  (callerId: 30) in 1 seconds


Line 3186: *osapiBsnTimer: Jan 28 16:00:14.005: a0:cc:2b:08:96:31 apfMsExpireCallback (apf_ms.c:637) Expiring Mobile!

1 Accepted Solution

Accepted Solutions

patoberli
VIP Advisor VIP Advisor
VIP Advisor
Could be a software bug on the WLC you are hitting, which version are you running?
Your debug output looks ok, can you run it a bit longer (debug client a0:cc:2b:08:96:31)? Including an authentication retry.

View solution in original post

2 Replies 2

patoberli
VIP Advisor VIP Advisor
VIP Advisor
Could be a software bug on the WLC you are hitting, which version are you running?
Your debug output looks ok, can you run it a bit longer (debug client a0:cc:2b:08:96:31)? Including an authentication retry.

Nick C.
Beginner
Beginner
Rebooting the AP fixed the issue. Probably a bug related to the iOS version. Thanks for the help!
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Recognize Your Peers