Backup port for WLC 2100

[Emerson Rodrigues]

Hello guys,

I've got an cisco WLC 2100, and i want to configure a backup port, updated the IOS to the last version but we don't have the option to setup the backup port (as shown in picture below).

Is there another way to configure an backup port on this WLC 2100?

Thanks for any advice.

[Rasika Nayanajith · Accepted solution]

2100 does not support backup port configuration. If supported you should be able to configure primary and backup port for an interface like this in WLC CLI.

config interface port

Tried with my 2106 & it is not allowed.

(2106-4) >config interface port vlan146 ?    

         Enter the physical port number.

(2106-4) >config interface port vlan146 1 ?

HTH

Rasika

**** Pls rate all useful responses ****

[Emerson Rodrigues]

Thanks for help!!

[Rasika Nayanajith]

No worries ,Happy to help.... thanks for rating as well