Wireless

Our organization has WLC5508:s managed by PI2.2. Now we are incorporating another organization that has WAP561:s. Can we manage these with PI or even better is there any firmware to the 561 to make them lightweigt, like some other models that can hav...

We have a Cisco WLC 4400 which supports approximately 100 to 150 guest users at any time. Is there any way to connect a printer the wireless network for some of the clients to use? Sorry for the generalities I just want to know if it is possible. Tha...

Regards,I had some drawbacks to share printers on windows 8Specifically it is:I have the "a" shared printer on the computer "1"When the user closes the session on the computer "1" users who are using the share lose access (which from my point of view...

I am running PEAP with no TLS currently for an internal wireless network. I would like to start transitioning clients to use certificates and TLS. Is it possible to have some clients use certificates for auth and some without certificates on the same...

Hello,I'm facing a problem with cap702i the ping response is very important around 400ms even the access point is too close and i set the data rate to start from 5.5 every things set up as it should be  please any help? to get back to the 400 mswhen ...

We have a WLC 5508 acting as a DHCP proxy, with DHCP being handled in 1 of 2 places (based on weather its the guest network or employee network) recently clients have begun connecting to the network but not getting IP addresses, I have verified there...

Hello, I deployed unified wireless network and access points in local and flex connect mode. I noticed that wireless users are getting IP addresses from HQ where the WLC resides.What can I do to make wireless users get IP address from their branch ne...

Bonjour à tous,   J'ai un problème avec le modèle d'antenne wifi AIR-CAP3502I-E-K9. En effet, je veux connecter cette antenne wifi au contrôleur WLC dont la version est 7.0.230.0. Pour cela, je dois supprimer l'ancien IOS Cisco pour qu'il reste assez...

I'm not sure if this is the right place for this but... I currently have a 2504 WLC and 3 Aironet 2602i AP's with a private network set up. I need to add guest access for visitors. Is it possible to configure this with the equipment I have currently?...

We are using WCS-Standard-K9 with a license for 100 AP installed on a Server 2003 and since Server 2003 is now EOL we need to move it to Server 2008 or Server 2012 but unfortunately WCS does not support Server 2008 or Server 2012.What are our options...

Our customers in the same area lost connection to network. Their computers have no wireless signals for about 2 minutes.I check the WLC logging. I serched by using their MAC address, and found two of their mac address appear at that period.I don't kn...

I have to upgrade one of our 5508 WC from 7.0.230.0 with Field Recovery Image Version 6.0.182.0 to 7.6.130.0.the question is, do I need to upgrade FUS or Field Recovery Image Version before I upgrade to 7.6.130.0. or can I keep the FUS the same versi...