Bench testing a Cisco 1552 mesh access point

[tdennehy]

Does anyone have any other method of staging/priming their Cisco 1552 mesh access points? 

I have four to work with for a pilot, but they did not come with bench power supplies or power cords.  They'll power up with 802.3af power, and even a power injector leftover from a Cisco 1252 access point, however the radios do not want to power up.

Anyone have any tricks to bench test them/prime them?

Thanks in advance!          

[Scott Fella]

Oh boy... You are out of luck here without a power injector or the AC cable. You really need those when you stage the AP and that is what I do. I have the power injector for the RAP and the AC for the maps.

Sent from Cisco Technical Support iPhone App

[tdennehy]

I was hoping there was a way to open it up and plug in an AC power cord in some way.

[Scott Fella]

Not really. Even the kit for hard wire has an adapter. I guess you can be risky and rig one, but I wouldn't.

Sent from Cisco Technical Support iPhone App